Laserfiche WebLink
Slope, S ( %) : Can be entered by the user or the program calculates <br />the slope when the user selects an area from the screen. <br />Length (L) : Can be entered by the user. If the user selects an area from the screen, <br />the length is not calculated since the Gross Erosion is directly calculated. <br />Topographical Factor (Ls) : Will be calculated from Length (L) and the Slope (S), <br />only when these values are entered by the user directly, as against calculated <br />by the program from the screen. In the second case, the value of Ls is calculated <br />for individual grids and not for the entire area. <br />Ls = (U72.6) ^m * ((430 *SA 2 + 30 *S + 0.43)/(6.613)) <br />where L and S are defined above and <br />m = 0.5 if S = >5 %; = 0.3 if S <= 3% ; = 0.4 otherwise. <br />Gross Erosion, E (tons /acre /year) : Calculated from the above defined parameters <br />for each area defined. If the user selects an area from screen, E is calculated <br />in each grid and the cumulative value is calculated. <br />E = R * K * Ls * C * P, where all the parameters are as defined above <br />Volume Calculations: <br />Required User Input <br />Sediment Delivery Ratio (DR) : Default = 0.37 <br />Time Period,T (years) : Time of analysis; typically the time of the storm event <br />Density of the sediment (D) : The post- deposit density of the sediment <br />Runoff (1) : Calculated from some other routine like Curve Number and Runoff <br />Attachment 2.05.3(3)-21-12 <br />