Laserfiche WebLink
PUBLIC NOTICE <br />Bear Coal Company, Inc., 1326 War Emblem Lane, Rock Springs, WY, 82901, has filed <br />with the Colorado Division of Reclamation, Mining & Safety, a complete application for a <br />technical revision for its Bear No. 3 Mine, mining permit C- 1981 -033. The proposed <br />revision will provide for the installation of a twelve inch diameter treatment pond bypass <br />pipeline so spring water emitting from the landslide can be piped directly to the North <br />Fork of the Gunnison River. <br />The Bear No. 3 Mine is located immediately south and east of the town of Somerset, <br />CO. The North Fork of the Gunnison River is located north and west of the Mine. The <br />mine permit area is located on the U.S. Geological Survey 7.5 minute Somerset <br />Quadrangle map within the following sections. <br />Township 13 South, Range 90 West, 6th P.M. <br />Sections 8, 16, 17, 18, 20 and 21 <br />The approved Bear No. 3 Mine permit area contains 1108.4 acres of land, 1079.6 acres <br />of private surface and 28.8 acres of Federal surface. Private minerals within the <br />proposed permit area encompass 104.4 acres with Federal minerals accounting for the <br />balance of 1004 acres. The surface of the permit area is owned by Bear Coal Company, <br />Oxbow Carbon and Minerals, Arch Coal Company, DLH 2001 Family Trust, and the U. <br />S. Government which owns approximately 28.8 acres of the permitted land in Section <br />21. <br />A copy of the proposed revision is available for public inspection at the Paonia Public <br />Library, 2 Third Street, Paonia, CO, and at the offices of the Division of Reclamation, <br />Mining & Safety, 1313 Sherman St., Room 215, Denver, CO, 80203, (303) 866 -3567. <br />Written comments regarding this application may be submitted to and additional <br />information may be obtained from the Division of Reclamation Mining & Safety at the <br />above address. Written comments must be received by the Division of Reclamation, <br />Mining & Safety within 10 days after the date of this publication in order to be <br />considered. <br />