Laserfiche WebLink
INDIVIDUAL SOURCE SUMMARY (tons per year) <br />Sources Included <br />PM10 <br />SOx <br />NOx <br />CO <br />VOC <br />Haul Roads <br />0.00 <br />12.1 <br />121.3 <br />1.09 <br />SOx <br />Drop Points <br />0.00 <br />6.36 <br />0.06 <br />NOx <br />0.76 <br />Stock piles <br />0.01 <br />0.55 <br />CO <br />0.30 <br />2.37 <br />Crushing <br />0.00 <br />VOC non - methane <br />0.06 <br />0.44 <br />4.42 <br />Screening <br />0 <br />Exposed Areas <br />1.06 <br />Trucks - Diesel <br />0.01 <br />0.04 <br />0.37 <br />0.16 <br />0.02 <br />Front End Loader <br />0.01 <br />0.02 <br />0.17 <br />0.05 <br />0.02 <br />Generator - Diesel (1-4) <br />0.00 <br />0.00 <br />0.00 <br />0.00 <br />0.00 <br />Generator - Gasoline (5-8) <br />0.00 <br />0.00 <br />0.00 <br />0.00 <br />0.00 <br />Other: <br />EMISSION SUMMARY <br />Pollutant <br />Gram /sec <br />Lbs /hr <br />Lbs/24hr <br />Tons/yr <br />PM10 <br />1.53 <br />12.1 <br />121.3 <br />1.09 <br />SOx <br />0.08 <br />0.64 <br />6.36 <br />0.06 <br />NOx <br />0.76 <br />6.06 <br />60.56 <br />0.55 <br />CO <br />0.30 <br />2.37 <br />23.7 <br />0.21 <br />VOC non - methane <br />0.06 <br />0.44 <br />4.42 <br />0.04 <br />Emission Summary <br />Basic Instructions <br />These calculation sheets use Microsoft Excel, so you will need the Microsoft Excel program to use these <br />spread sheets. <br />Typing in the cell can delete everything in the cell; number or text or equation, it is good practice to create a <br />master sheet and then copy /rename a working file. <br />The only numbers that should be changed are in the blue shaded cells. All the other numbers are <br />calculated or brought forward to this page. If you want to change the emission rates you need to go to the <br />page where the calculation is performed to change the emission rates. You will need to explain the changes <br />and include references for the changes. <br />The emissions for an aggregate plant typically include dust and engine emissions. The equipment listed on <br />the tabs at the bottom of the page, crushing, screening, trucks, loaders, roads, stock piles, drop points, open <br />areas, and generators. You enter the information at the top of this page in the blue boxes. This data is then <br />transferred to the attached sheets. Review the attached sheets to check the operating conditions represent <br />how you are operating. The results are automatically copied by the program to the summary page. Do not <br />forget to attach all the calculation sheets to the summary when submitting the emission estimate for <br />permitting. <br />