Laserfiche WebLink
3.08 DAMAGE REPAIR <br />A. If the GCL is damaged (pre - hydrated, torn, punctured, perforated, etc.) during installation, it may be <br />possible to repair it by cutting a patch to fit over the damaged area. The patch shall be obtained from <br />a new GCL roll and shall be cut to size such that a minimum overlap of twelve (12) inches is achieved <br />around all of the damaged area. Granular bentonite or bentonite mastic should be applied around the <br />damaged area prior to placement of the patch. It may be desirable to use an adhesive to affix the <br />patch in place so that it is not displaced during cover placement. <br />** *END OF SECTION * ** <br />ame0 <br />Section 02776.2 Page 7 of 7 September 15, 2011 <br />Geosynthetic Clay Liner (GCL) Revision 0 <br />S: \Projects \1125E CCV CQA \H2 - Design\ LOB_Liner_September2011 \02776.2.r0.doc <br />