Laserfiche WebLink
Plant Name <br />Seeding Rate (PLS /acre) <br />Arriba Western Wheatgrass <br />1.80 <br />Primar Slender Wheatgrass <br />1.30 <br />Luna Pubescent Wheatgrass <br />2.00 <br />Nordan Crested Wheatgrass <br />1.00 <br />Paloma Indian Ricegrass <br />1.40 <br />Needle and Thread grass <br />1.60 <br />Hachita Blue Grama <br />0.30 <br />Lewis Flax <br />0.50 <br />Cedar Palmer Penstemon <br />0.10 <br />Fourwing Saltbush <br />2.00 <br />A. Provide plant name and seeding rate <br />7 (FORM 2 - Public_filing) <br />12. List the seed mixture to be used in the re- establishment of vegetation. See the attached seed mixture calculation to obtain <br />PLS /acre. For assistance with formulating seed mixtures and rates, contact the local NRCS if on private land, BLM/USFS if <br />on public land or State Land Board if on state land. <br />B. Describe the method for seed bed preparation, and application method for grass /forb seeding: <br />Soil material will be replaced to any areas it was removed from. Compacted areas <br />will be scarified. Broadcast seed on disturbed areas at the prescribed rate, or <br />higher. After seeding, disturbed areas will be raked or back -drug by skid steer <br />loader or mini excavator bucket. <br />V. TERMS AND CONDITIONS FOR PROSPECTING OPERATIONS: <br />3. Reclamation measures shall be fulfilled in a timely manner and completed within five (5) years of completion of prospecting <br />activities. <br />4. The prospecting operations described in this Notice will be conducted in such a manner as to minimize surface disturbances. <br />In addition to the measures required in Rule 5, precautions to be taken include: <br />A. Confinement of operations to areas near existing roads or trails, where practicable. Existing roads which are to remain as <br />permanent roads after prospecting activities are completed shall be left in a condition equal to or better than the pre - <br />prospecting condition; <br />B. Drilling shall be conducted in such a way as to prevent cuttings and fluids from directly entering any dry or flowing <br />stream channel. Drill cuttings must be spread to a depth no greater than one -half (1/2) inch or buried in an approved <br />disposal pit; <br />