Laserfiche WebLink
4 (FORM 2 - Public filing) <br />I I . Describe proposed surface excavation or other land disturbance, including roads, pits, trenches, waste piles, drill pads and <br />collar areas of underground workings, ponds, etc... <br />Existing roads will be used (see attached air photo). Minor brush clearing will be needed for <br />drill sites and access. Small pits will be constructed at each site to catch drill cuttings. No <br />ground water is expected, but if encountered, the pits will contain any tluids. <br />12. Proposed Disturbance (approximate) Describe the proposed drilling to be conducted, including anticipated number of holes, <br />diameter, depth, location, etc... Submit additional pages if necessary: <br />A. Drill Pads: Quantity 15.00 Average Width 20.00 (ft) Average Length 50.00 (ft) <br />B. Drill Holes Quantity 15.00 Depth 450.00 (ft) Diameter 6.00 (i <br />C. Mud Pits: Quantity 15.00 Average Width 4.00 (ft) Average Length 8 (ft) <br />Average Depth 3.00 (ft) <br />Described proposed underground work, including reopening of old workings, advancement of adits or shafts, <br />trenches, pits, cuts, rock dumps, or other types of disturbance, describe type, quantity and general dimensions: <br />N/A <br />/( /1 X1) h„4 -- <br />co.nlrie • <br />F. Other Disturbances (please describe): <br />N/A <br />G. Indicate Chemicals and Fuels used or stored on site. List type, quantity and method to store. <br />Used and contained in the equipment will be: diesel fuel, hydraulic oil, transmission fluid, <br />and antifreeze. <br />F. New Road(s): Length 0.00 (ft) Width 0.00 ( ft ) <br />Significantly Upgraded Road(s) Length 0 00 (ft) Width 0 00 (ft) <br />Are culverts or other crossings proposed? If so, please describe: <br />Note: minor clearing of brush and tree limbs will be needed on old roads and at drill <br />sites to allow safe access and work environment. <br />