2011-09-09_REVISION - M1981185 ‎(40)‎

• Permit No: M1981185
• IBM Index Class Name: REVISION
• Doc Date: 9/9/2011
• Doc Name: Attachment 3- Revised Appl. Maps
• From: R Squared, Inc.
• To: DRMS
• Type & Sequence: CN1
• Media Type: D
• Archive: No

EXISTING
GROUND
EXISTING
GROUND
70' MIN.
6"
MIN.
PLAN VIEW * SHALL EXTEND FULL WIDTH
OF INGRESS AND EGRESS
OPERATION.
GEOTEXTILE
EROSION CONTROL
(CLASS 2)
ELEVATION SECTION
12' MIN.
6"
MIN.
.'∎Mr. :r :p" Yom" W s
GEOTEXTILE
EROSION CONTROL
(CLASS 2)
SECTION B-B
NOTES:
I. AGGREGATE FOR THE CONSTRUCTION ENTRANCE SHALL CONFORM
TO SUBSECTION 208.02 (K).
2. THE CONTRACTOR SHALL PROTECT CURB AND GUTTER THAT
CROSSES THE ENTRANCE FROM DAMAGE. PROTECTION OF THE
CURB AND GUTTER WILL NOT BE PAID FOR SEPARATELY, BUT
SHALL BE INCLUDED IN THE WORK.
VEHICLE TRACKING PAD
CDOT M SHT. 1
VEHICLE TRACKING CONTROL
EXISTING
PAVEMENT
(DEPTH VARIES)
EXISTING
GROUND
APpR0 S AKE5
TO EACH T! 90°
(TYp\
F iv
POINT A
USE TWO WOOD STAKES AT ALL
EROSION LOG ENDS OR JOINTS
PLAN VIEW
USE A STAKE EVERY 24"
AND CONTINUE ALTERNATE
ORIENTATION THROUGHOUT
THE LENGTH OF THE EROSION LOG
EROSION LOG
0
SECTION A -A
1. EROSION LOGS SHALL BE EMBEDDED 2 INCHES INTO THE SOIL.
2. STAKES SHALL BE EMBEDDED TO A MINIMUM DEPTH OF 12 INCHES.
3. EROSION LOGS SHALL BE TIGHTLY ABUTTED WITH NO GAPS.
WETLANDS OR FEATURES
REQUIRING PROTECTION
0 I O
TYPICAL STAKE INSTALLATION
POINT B
•
POINT A
r/I/
PLAN VIEW
POINTS A SHALL BE HIGHER THAN POINT B.
ELEVATION
NOTES
EROSION LOG
// / / �j� o
� �✓i �i x/iX/iXli y�i: , c�O. C OAV A
•:I
ISOMETRIC VIEW
STAKES
APPROXIMATELY 90°
TO EACH OTHER
(TYP.)
NOTES:
I. EROSION LOGS USED AT TOE OF SLOPE SHALL BE PLACED 5 TO 10 FEET
BEYOND TOE OF SLOPE TO PROVIDE STORAGE CAPACITY.
2. EROSION LOGS SHALL BE PLACED ON T E CONTOUR, WITH ENDS FLARED
UP SLOPE.
EROSION LOG TOE OF SLOPE PROTECTION
CDOT M SHT. 3
EROSION LOG APPLICATIONS