2011-08-09_REVISION - M1981185 ‎(56)‎

• Permit No: M1981185
• IBM Index Class Name: REVISION
• Doc Date: 8/9/2011
• Doc Name: CN-01 112d permit application Exhibit G thru H
• From: Wildcat Mining Corporation
• To: DRMS
• Type & Sequence: CN1
• Email Name: WHE
• Media Type: D
• Archive: No

SOP NUMBER 0.0
Page 5 of 9
Pump Testing
All analyses will be performed using AQTESOLV for Windows software (Duffield, 1996)
and /or Microsoft Excel ® . The pump test data will be analyzed using appropriate methods as
presented in Table 1 (use references for equations). The method of analysis will be selected by
matching known aquifer conditions with the required assumptions outlined in Table 1. If the
hydrogeologic conditions and pumping test data satisfy more than one method of analysis, then
results will be presented for each method used.
4.0 REPORTING
Pumping test data analyses and interpretations will be presented in the Report. At a minimum, this
portion of the Report will include:
O A description of the procedures implemented during testing;
• Interpretations of pumping test data
o Tables containing well completion information (e.g., well elevations and screened intervals)
and water level data (e.g., initial and final pumping water levels);
o Tables summarizing estimated aquifer property values and water quality parameters collected
during the pumping tests; and
• AQTESOLV© reports and graphs, as well as any manually produced graphs and calculations.
5.0 REFERENCES
Duffield, Glenn M., 1996. AQTESOLV for WindowsTM, User's Guide. HydroSOLVE, Inc.