Laserfiche WebLink
• <br />• <br />• <br />OrePrep® F -579 Frother MSDS: 0010123 <br />Skin Contact: <br />Wash immediately with plenty of water and soap. <br />Eye Contact: <br />Rinse immediately with plenty of water for at least 15 minutes. <br />Inhalation: <br />Material is not expected to be harmful if inhaled. Remove to fresh air. <br />5. FIRE - FIGHTING MEASURES <br />Extinguishing Media: <br />Use water spray, carbon dioxide or dry chemical. <br />Protective Equipment: <br />Firefighters, and others exposed, wear self - contained breathing apparatus. <br />Special Hazards: <br />Keep containers cool by spraying with water if exposed to fire. <br />6. ACCIDENTAL RELEASE MEASURES <br />7. HANDLING AND STORAGE <br />Date: 07/08/2005 Page 2 of 6 <br />Personal precautions: <br />Where exposure level is known, wear approved respirator suitable for level of exposure. Where exposure level is not <br />known, wear approved, positive pressure, self- contained respirator. In addition to the protective clothing /equipment in <br />Section 8 (Exposure Controls /Personal Protection), wear impermeable boots. <br />Methods For Cleaning Up: <br />Cover spills with some inert absorbent material; sweep up and place in a waste disposal container. Flush spill area <br />with water. <br />HANDLING <br />Precautionary Measures: Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. <br />Special Handling Statements: None <br />STORAGE <br />None <br />8. EXPOSURE CONTROLS /PERSONAL PROTECTION <br />Engineering Measures: <br />Engineering controls are not usually necessary if good hygiene practices are followed. <br />Respiratory Protection: <br />For operations where inhalation exposure can occur, use an approved respirator recommended by an industrial <br />hygienist after an evaluation of the operation. Where inhalation exposure can not occur, no respiratory protection is <br />required. <br />