2011-08-08_REVISION - M1977493 ‎(35)‎

• Permit No: M1977493
• IBM Index Class Name: REVISION
• Doc Date: 8/8/2011
• Doc Name: EPP- Material Safety Data
• From: Climax Molybdenum
• To: DRMS
• Type & Sequence: TR18
• Media Type: D
• Archive: No

Pd NALCO
•
•
•
UNSUITABLE EXTINGUISHING MEDIA :
Do not use water unless flooding amounts are available.
MATERIAL SAFETY DATA SHEET
PRODUCT
NALCO® 9741
EMERGENCY TELEPHONE NUMBER(S)
(800) 424 -9300 (24 Hours) CHEMTREC
FIRE AND EXPLOSION HAZARD :
Combustible Liquid; may form combustible mixtures at or above the flash point. Empty product containers may
contain product residue. Do not pressurize, cut, heat, weld, or expose containers to flame or other sources of
ignition. May evolve oxides of carbon (COx) under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE FIGHTING :
In case of fire, wear a full face positive - pressure self contained breathing apparatus and protective suit.
6. I ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS :
Restrict access to area as appropriate until clean -up operations are complete. Use personal protective equipment
recommended in Section 8 (Exposure Controls /Personal Protection). Stop or reduce any leaks if it is safe to do so.
Ventilate spill area if possible. Remove sources of ignition. Ensure clean -up is conducted by trained personnel only.
Do not touch spilled material. Have emergency equipment (for fires, spills, leaks, etc.) readily available. Notify
appropriate government, occupational health and safety and environmental authorities.
METHODS FOR CLEANING UP :
SMALL SPILLS: Soak up spill with absorbent material. Place residues in a suitable, covered, properly labeled
container. Wash affected area. LARGE SPILLS: Contain liquid using absorbent material, by digging trenches or by
diking. Reclaim into recovery or salvage drums or tank truck for proper disposal. Clean contaminated surfaces with
water or aqueous cleaning agents. Contact an approved waste hauler for disposal of contaminated recovered
material. Dispose of material in compliance with regulations indicated in Section 13 (Disposal Considerations).
ENVIRONMENTAL PRECAUTIONS :
Prevent material from entering sewers or waterways.
7.
HANDLING AND STORAGE
HANDLING :
Do not get in eyes, on skin, on clothing. Do not take internally. Use with adequate ventilation. Do not breathe
vapors /gases /dust. Keep the containers closed when not in use. Have emergency equipment (for fires, spills, leaks,
etc.) readily available. Ensure all containers are labeled. Do not use, store, spill or pour near heat, sparks or open
flame.
STORAGE CONDITIONS :
Store in suitable labeled containers. Store the containers tightly closed. Store away from heat and sources of
ignition. Have appropriate fire extinguishers available in and near the storage area. Connections must be grounded
to avoid electrical charges. Store separately from oxidizers.
SUITABLE CONSTRUCTION MATERIAL :
Compatibility with Plastic Materials can vary; we therefore recommend that compatibility is tested prior to use.
Nalco Company 1601 W. Diehl Road • Naperville, Illinois 60563 -1198 • (630)305 -1000
For additional copies of an MSDS visit www.nalco.com and request access
3/9