Laserfiche WebLink
4 (FORM 2 - Public filing) <br />11. Describe proposed surface excavation or other land disturbance, including roads, pits, trenches, waste piles, drill pads and <br />collar areas of underground workings, ponds, etc... <br />Three drill pads, each 0.2 acres in size. Each drill pad will include up to three sumps approximately 10' x 10' <br />x 6' deep to contain drill cuttings. Two of the drill pads will be adjacent to the existing Rat Creek road (USFS <br />- - - . . - - - - .. • • 1 1 -- - - -- - -- - . S <br />drill holes are proposed to be drilled with one drill rig. Each drill hole will be abandoned in its entirety upon <br />completion. Only one drill hole will be open at any given time. <br />12. Proposed Disturbance (approximate) Describe the proposed drilling to be conducted, including anticipated number of holes, <br />diameter, depth, location, etc... Submit additional pages if necessary: <br />A. Drill Pads: Quantity 3.00 Average Width 80.00 (ft) Average Length 100.00 (ft) <br />B. Drill Holes: Quantity 15.00 Depth 2,500.00 (ft) Diameter 6.00 (in) <br />C. Mud Pits: Quantity 9 Average Width 10.00 (ft) Average Length 10.00 (ft) <br />Average Depth 6.00 (ft) <br />Described proposed underground work, including reopening of old workings, advancement of adits or shafts, <br />trenches, pits, cuts, rock dumps, or other types of disturbance, describe type, quantity and general dimensions: <br />None <br />F. Other Disturbances (please describe): <br />None <br />G. Indicate Chemicals and Fuels used or stored on site. List type, quantity and method to store. <br />No chemicals used or stored on site. An estimated 200 gallons of diesel fuel will he <br />contained in fuel storage tanks on the drill rig. <br />F. New Road(s): Length 900.00 (ft) Width 20.00 (ft) <br />Significantly Upgraded Road(s) Length (ft) Width (ft) <br />Are culverts or other crossings proposed? If so, please describe: <br />Culverts may be used where needed. 8' x 12' mud mats may be used to cross small <br />wet areas. <br />