Laserfiche WebLink
Location <br />This Week <br />(tons) <br />Cumulative <br />(tons) <br />Comments <br />E Cresson Clay Processing <br />8,475 <br />193,118 <br />S Cresson Clay Processing <br />0 <br />201,199 <br />Processing in area complete. <br />Squaw Gulch Processing <br />0 <br />35,816 <br />Processing in area complete. <br />Total <br />8,475 <br />425,522 <br />• <br />amec <br />Earth & Environmental <br />D) Cut to Fill <br />1) VLF <br />No work performed during the week. <br />E) Soil Liner Fill <br />1) VLF <br />Soil liner fill (SLF) placement continued in the areas shown on Figure 2. Subgrade was <br />approved and moisturized prior to placement using a tandem -axle water truck. Placement was <br />performed using two CAT D -6 dozers, and one CAT skid steer loader in a one -foot compacted <br />lift. Moisture conditioning was performed using a tandem -axle water truck and compaction <br />was performed using a 10 -ton vibratory smooth drum compactor. Nuclear density testing, <br />moisture verification, and depth checks were performed in the geomembrane deployment areas <br />throughout the week. All test results were within project specifications and all test locations <br />were surveyed by Ames. <br />Soil liner fill material was hauled and stockpiled in temporary stockpiles near stations A26 +00 <br />( + / -) and H27 +00 ( + / -) using CAT 777 and 10 ton articulating haul trucks loaded by a CAT <br />385 excavator. The SLF was hauled from the East Cresson Clay process. <br />F) Low Volume Solution Collection System <br />III 1) Low Volume Solution Collection Piping <br />No work performed during the week. <br />2) Low Volume Solution Collection Fill (LVSCF) <br />Finishing of the previously placed LVSCF surface was performed using a CAT D -6 LGP dozer <br />and a CAT skid steer loader. LVSCF placement was not performed during the week. <br />G) Material Processing <br />1) East Cresson Clay Borrow Area <br />Processing of SLF material continued this week. A CAT 320 excavator, a CAT 330 excavator, <br />a CAT 950 front -end loader, and tandem -axel haul trucks were used to excavate, haul, and <br />process the material. <br />VLF Weekly Report WE 07.24.10.D <br />