Laserfiche WebLink
JVUlUIvI I.THIVlUC DK1l?UC 1 I C F'KJ <br />Material Safety Data Sheets (MSDS) <br />Revision date: 20/3/2008 Pagina 2 de 5 <br />If wearing contact lenses, remove them. Wash eyes with plenty of dean and cool water for at least 10 minutes while _ <br />pulling eyelids up, and seek medical assistance. <br />Skin contact. <br />Remove contaminated clothing. Wash skin vigorously with water and soap or a suitable skin cleaner. NEVER use <br />solvents or thinners. <br />Ingestion. <br />If accidentally ingested, seek immediate medical attention. Keep calm. NEVER induce vomiting. <br />5. FIRE FIGHTING MEASURES. <br />Recommended extinguishing methods. <br />Extinguisher powder or COZ. In case of more serious fires, also alcohol-resistant foam and water spray. Do not use a <br />direct stream of water to extinguish. <br />Special risks. <br />Fire can cause thick, black smoke. As a result of thermal decomposition, dangerous products can form: carbon <br />monoxide, carbon dioxide. Exposure to combustion or decomposition products can be harmful to your health. <br />Fire protection equipment. <br />According to the size of the fire, it may be necessary to use protective suits against the heat, individual breathing <br />equipment, gloves, protective goggles or facemasks, and gloves. <br />Other recommendations. <br />Use water to cool tanks, cisterns, or containers dose to the heat source or fire. Take wind direction into account. <br />Prevent the products used to fight the fire from going into drains, sewers, or waterways. <br />6. MEASURES TO TAKE IN CASE OF ACCIDENTAL SPILL. <br />Individual Precautions. <br />Eliminate possible ignition points and ventilate the area. Avoid breathing fumes. For exposure control and individual <br />protection measures, see section 8. <br />Cleaning methods. <br />Pick up the spill with non-combustible absorbent materials (soil, sand, vermiculite, diatomite, etc.). Pour the product <br />and the absorbent in an appropriate container. The contaminated area should be immediately cleaned with an <br />appropriate de-contaminator. Pour the decontaminator on the remains in an opened container and let it act various <br />days until no further reaction is produced. For later elimination of waste, follow the recommendations under section 13. <br />Environmental protection precautions. <br />Prevent the contamination of drains, surface or subterranean waters, and the ground. In case of large spills or if the <br />product contaminates lakes, rivers, or sewers, inform the responsible authorities according to local legislation. <br />7. HANDLING AND STORAGE. <br />7.1 Handling. <br />The fumes are heavier than air and can spread across the ground. They can form explosive mixtures with air. Prevent <br />the creation of flammable or explosive fume concentrations in the air; prevent fume concentrations above work <br />exposure limits. The preparation must only be used in areas where all unprotected flames and other ignition points <br />have been eliminated. Electrical equipment has to be protected according to applicable standards. <br />The preparation can be electrostatically charged: always use earth grounds when transferring the product. Operators <br />must use anti-static footwear and clothing, and floors must be conductors. <br />Keep the container tightly closed and isolated from heat sources, sparks, and fire. Do not use tools that can cause <br />sparks. <br />Prevent the preparation from contacting the skin or eyes. Avoid the inhalation of fumes and mists that form when <br />spraying. <br />For personal protection, see section 8. Never use pressure to empty the containers. They are not pressure-resistant <br />containers. <br />In the application area, smoking, eating, and drinking must be prohibited. <br />Follow legislation on occupational health and safety. <br />Keep the product in containers made of a material identical to the original. <br />• <br />SODIUM CYANIDE BRIQUETTE PRS MSDS (MATERIAL SAFETY DATA SHEETS)