2011-03-30_REPORT - C1980005

• Permit No: C1980005
• IBM Index Class Name: REPORT
• Doc Date: 3/30/2011
• Doc Name: 2010 Revegetation Report
• From: Seneca Coal Company
• To: DRMS
• Permit Index Doc Type: Reveg Monitoring Report
• Email Name: JDM
• Media Type: D
• Archive: No

• Standard Deviation of Mean Allowable Cover
Sample Size
Minimum Adequate Sample Size
5.10
15
29
As can be seen, sample adequacy based on first-hit allowable herbaceous cover was not
achieved. Hence, in accordance with a proposal to address this problem for use of the Mountain
Brush Reference Area discussed with and approved by DRMS (see Appendix 7), evaluation of
sample adequacy based on all-hit data was undertaken:
ANNUAL DEDUCTION CALCULATION
Total All Hit Vegetation Cover 95.00
Noxious Weed Cover - 0.47
Total Minus Noxious 94.53
Allowable Annual Cover Limit x 0.1
Allowable Annual Cover 9.45
Actual Annual Cover (w/o noxious annuals) - 1.23
Non-allowable Annual Cover (zero in calculations 8.2
below if positive)
ALLOWABLE ALL-HITCOVER CALCULATION
Total All Hit Vegetation Cover 95
00
•
Noxious Weed Cover -
.
0.47
Total Minus Noxious 94.53
Excess Non-allowable Annual Cover Deduction - 0.0
Woody Plants - Not Allowed - 69.60
Mean Allowable Cover - All Hit 24.93
Standard Deviation of Mean Allowable Cover 4.56
Sample Size 15
Minimum Adequate Sample Size 7
First Hit to All-hit Ratio (see Appendix 6, Table 6-4) 0.496
Mean Allowable Cover Converted to First-hit Basis 12.37
For the Sagebrush Reference and the Phase II Bond Release Block, sample adequacy was
reached using first-hit data:
SAGEBRUSH REFERENCE AREA (TABLE 6-3, APPENDIX 6)
ANNUAL DEDUCTION CALCULATION:
Total First Hit Vegetation Cover 71.10
Noxious Weed Cover - 0.07
Total Minus Noxious 71.03
Allowable Annual Cover Limit X 0.1
• 11