Laserfiche WebLink
3.0 SUBSIDENCE ZONING <br />• <br />i• <br />3.1 ZONES OF MINOR SUBSIDENCE IMPACT <br />No subsidence impact is expected in those areas where there is a thick overburden <br />cover. An overburden thickness in excess of 1,000 feet has been selected to define areas <br />of low subsidence impact, as shown on Map 27. No areas within the present Bowie #2 <br />mine plan lie under more than 1,500 feet of overburden. These areas are limited to the <br />central part of the permit area, where the ground surface is generally flat above the <br />northerly dipping D-seam. <br />The amount of subsidence arising from the mining of double seam mining panels, <br />will be, typically less than 10.0 feet. Maximum strains at surface resulting from mining will <br />generally be, 7,000 u-in/in or less. The development of surface cracks due to subsidence <br />is not anticipated. Damage, if any, should therefore considered negligible to appreciable. <br />3.2 ZONES OF INTERMEDIATE SUBSIDENCE IMPACT <br />Zones with between 500 and 1,000 feet of overburden cover above the B-seam in <br />double seam mining are designated as zones of intermediate subsidence impact on Map <br />27. Subsidence magnitudes, 16.0 feet, and strains, 35,000 to 10,000 u-in/in, are predicted <br />for these zones. Appreciable to severe damage may result to surface structures, if <br />present, due to subsidence. There is a risk that subsidence fractures may occur at the <br />ground surface where the overburden within these zones is thinner and the geological and <br />mining conditions are unfavorable. <br />3.3 ZONES OF GREATEST SUBSIDENCE IMPACT <br />Zones of greatest subsidence impact are shown on Map 27 as those zones having <br />less than 500 feet of overburden cover. Large strains, 60,000 to 30,000 u-in/in, are <br />predicted within these zones. This subsidence could result in severe damage to any <br />surface structures located within these zones. There is a moderate risk of subsidence <br />cracks occurring anywhere within the zones. Experience at the Bowie #1 Mine show that <br />these high risk zones include areas where the overburden is less than 500 feet thick, and <br />PR-OS <br />-28- <br />07/03 <br />/~PPRovsp <br />9~Zs~o3 <br />