Laserfiche WebLink
<br />®ACCU-r'EWT, <br />1_aboratories <br />CASE NARRATIVE / CONFORMANCE SUMMARY <br />Client: Venture Resources, Inc. Job No D20179 <br />Site: Venture Resources, Idaho Springs, CO Report Date 1/11/2011 4:11:09 PM <br />On 01/04/2011, 1 sample(s), 0 Trip Blank(s), and 0 Field Blank(s) were received at Accutest Mountain States (AMS) at a temperature <br />of 15.4 °C. The samples were intact and properly preserved, unless noted below. An AMS Job Number of D20179 was assigned to <br />the project. The lab sample ID, client sample ID, and date of sample collection are detailed in the report's Results Summary. <br />Specified quality control criteria were achieved for this job except as noted below. For more information, please refer to the analytical <br />results and QC summary pages. <br />Metals By Method SW846 6010B <br />Matrix LEACHATE Batch ID: MP3776 <br />¦ All samples were digested and analyzed within the recommended method holding time. <br />¦ All method blanks for this batch meet method specific criteria. <br />¦ Sample(s) D20179-1MS, D20179-1MSD were used as the QC samples for the metals analysis. <br />Metals By Method SW846 7470A <br />Matrix LEACHATE Batch ID: MP3774 <br />¦ All samples were digested and analyzed within the recommended method holding time. <br />¦ All method blanks for this batch meet method specific criteria. <br />¦ Sample(s) D20179-IMS, D20179-1MSD were used as the QC samples for the metals analysis. <br />Wet Chemistry By Method. SM20 4500H <br />Matrix AQ Batch ID: GN7906 <br />¦ The following samples were nm outside of holding time for method SM20 450OH: D20179-1A <br />¦ D20179-1A for pH: pH of SPLP leachate <br />AMS certifies that data reported for samples received, listed on the associated custody chain or analytical task order, were produced <br />to specifications meeting AMS's Quality System precision, accuracy and completeness objectives except as noted. <br />Estimated non-standard method measurement uncertainty data is available on request, based on quality control bias and implicit for <br />standard methods. Acceptable uncertainty requires tested parameter quality control data to meet method criteria. <br />AMS is not responsible for data quality assumptions if partial reports are used and recommends that this report be used in its entirety. <br />This report is authorized by AMS indicated via signature on the report cover. <br />Tuesday, January 11, 2011 Page 1 of 1 <br />moon 4 of 24 <br />AGCUTEST. <br />020179 `..... ""?