My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2010-12-08_PERMIT FILE - C1981008A (4)
DRMS
>
Day Forward
>
Permit File
>
Coal
>
C1981008
>
2010-12-08_PERMIT FILE - C1981008A (4)
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 4:27:44 PM
Creation date
1/21/2011 3:55:11 PM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
C1981008A
IBM Index Class Name
Permit File
Doc Date
12/8/2010
Doc Name
Pond 015 100Yr-24Hr Full Containment
Section_Exhibit Name
Section 2.05.3(3) Attachment 2.05.3(3)-20
Media Type
D
Archive
Yes
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
9
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
K = soil erodibility factor (function of site specific soil) <br />LS = length slope factor (from contour map & chart) <br />C = management factor dependent upon vegetation & mulch <br />P = erosion control practice factor <br />For the worst case drainage area that drains to Pond 015, the sediment load was determined to <br />be 0.04 acre -ft over 3 years. The calculations of this volume follow. <br />EM <br />The rainfall factor is the product of rainfall energy times the maximum 30- minute <br />intensity for a given rainstorm. It is considered as the erosive power of the rain for that <br />particular area. A chart of "R" values for Colorado developed by the Transportation <br />Research Board in 1980 shows that the "R" value for the entire Nucla area is 26. <br />K = 0.39 (NRCS soil type #14) <br />LS = 0.39 <br />The effects of topography on soil erosion are determined by the dimensionless "L" and <br />"S" factors, which account for both rill and interrill erosion. These factors have been <br />considerably revised since the initial Universal Soil Loss Equation. The new RUSLE <br />computer database for the combined "LS" factor is based on the soil's ratio of rill to <br />interrill erosion. For most western rangeland soils, the equations for low rill to interrill <br />ratio are used. Table 1 (from Predicting Soy Erosion by Wafer: A Guide to <br />Conservation Planning With the Revised Universal Soil Loss Equation - US <br />Department of Agriculture 1997) shows a chart based on these equations. From this <br />chart (attached on page 6) the LS value was interpolated from between the 2.0% and <br />3.0% slopes at 1000 feet of horizontal distance. <br />C=1.0 <br />Since the topsoil- stripped area in advance of the pit has no cover, a 0% appreciable <br />cover with no canopy was used for this factor. This is very conservative since roughly <br />half of the drainage area is undisturbed ground that does have cover. The factor comes <br />Revised May 2010 (PR06) Attachment 2.05.3(3) -20 -4 <br />
The URL can be used to link to this page
Your browser does not support the video tag.