Laserfiche WebLink
embankment because they are "dugout" structures and have a capacity of less than one acre- <br />foot; <br />7. Treating traffic areas with water or dust suppressant to reduce the potential for wind and water <br />erosion. <br />8. A sedimentation pond or a series of sedimentation ponds; <br />9. Soil surface mechanical manipulation measures that include contour furrowing, chiesel plowing, <br />etc.; <br />10. Topographic manipulations that include recontouring or reshaping of graded material in a <br />manner that minimizes the potential for soil erosion; <br />11. Surface protection measures that include surface stabilizers such as temporary cover crop, <br />permanent vegetation covers, or geotextile fabrics, etc.; <br />12. Linear detention and filtering structures that include filter fence, straw bale barrier, brush barrier, <br />and filter berms; <br />13. Measures used in conjunction with overland conveyances including check dams, sediment traps, <br />and water level spreaders; <br />Siltation structures or sedimentation ponds will be utilized for all major disturbed areas, except those permit <br />areas exempted by regulation. The remaining alternative sediment control methods may be used in <br />conjunction with the siltation structures or, in the case of the permitted areas, which are exempt (e.g., Rule <br />4.05.2(3) and (4)), they may be utilized individually. Small area exemptions (SAE) have been approved for • <br />various topsoil stockpiles at the mine site and Tie-Across Haul Road (TAHR) (see Attachment 13-8, <br />Designs for Catchment Sumps of Small Area Exemptions [SAE]). <br />All surface mining operations will be conducted to achieve the effluent limitations of Rule 4.05.2(6) for all <br />mixed drainage when it leaves the permit area. <br />Sedimentation ponds or impoundments will be constructed before creating new disturbances, unless <br />approved drainage diversions or other surface water control structures are installed. <br />Diversion Ditches <br />The diversion ditches or collection drains in the permit area are the following: <br />I.D. Name Location Design (rob 13) Approval Date <br />Ditch No. 4 II-W Attachment 13-2 1989 <br />Ditch No. 7 II-W Attachment 13-2 1992 <br />Clean Water Diversion II-W Attachment 13-2 1995 <br /> <br />PR-OS 2 Revised 01/06 <br />