Laserfiche WebLink
FLOMIN C 3505 COLLECTOR Page 3 of 5 <br />Revised: 05/06/2009 <br />7. HANDLING AND STORAGE <br />Handling: Wear protective equipment for eyes, body and respiratory system. <br />Storage: Store in closed containers in a cool area away from sources of heat or ignition. <br />Precautions should be taken to avoid static electricity discharge. Store in steel, <br />stainless steel, polyethylene, or polypropylene containers. <br />8. EXPOSURE CONTROLS / PERSONAL PROTECTION <br />Personal protection equipment: <br />- Respiratory: Wear a properly fitted NIOSH/MSA approved respirator whenever significant <br />exposure to vapor or mist is likely. <br />- Hand. Neoprene, polyvinyl, butyl rubber or nitrile rubber gloves are suitable. <br />- Eye: Wear chemical splash proof goggles or face shield. <br />- Skin: Wear coveralls and/or chemical apron and rubber footwear where <br />physical contact can occur. <br />Hygiene: Wash hands before breaks and immediately after handling the product. Do not <br />eat or store food and drinks where this product is used. <br />10 9. PHYSICAL AND CHEMICAL PROPERTIES <br />Appearance: Light yellow to green pellets <br />Odor. Disagreeable <br />Boiling point. N/A <br />Melting point: 522°F (272°C) <br />Vapor pressure: N/A <br />Bulk density: 40 Ibs/cu. ft. (0.64 g/cc) <br />Vapor density. N/A (Air =1) <br />Flash Point: -22°F (-30°C) TAG CC (for carbon disulfide) <br />pH: N/A (>12 for aqueous solutions) <br />Water solubility. Soluble <br />Viscosity: N/A <br />10. STABILITY AND REACTIVITY <br />Stability: Stable at normal conditions. No hazardous polymerization will <br />occur. <br />• <br />Conditions to avoid: High temperatures and ignition sources. Avoid moisture, strong <br />acids & oxidizing agents. Not compatible with copper or its alloys. <br />Hazardous decomposition <br />Products: Carbon disulfide, isobutyl alcohol, and carbon monoxide may form <br />under fire conditions.