Laserfiche WebLink
May Day Idaho Mine Complex 112 (d) Permit Application <br />0 <br />(d) Fracture System with Respect to Facilities <br />Several east-west faults are present within the permit area as shown in Attachment T-3. <br />None of the facilities are located on these faults. <br />The extent of fractures has not been determined. A fracture analysis will be undertaken <br />within the underground workings prior to tailings disposal. <br />(e) Potential Impacts to Surface and Groundwater <br />Surface water and groundwater can be impacted via the following pathways: <br />• Designated chemicals can enter directly into surface water via spills; <br />• Designated chemicals can enter into groundwater via infiltration from surface <br />spills; <br />• Designated chemicals can enter into groundwater via leaching from tailings. <br />6.4.20(9) Groundwater Quality Data <br />(a) Existing and Reasonably Potential Future Groundwater Uses Two Miles Down- <br />gradient of Affected Lands <br />• <br />There is little published information regarding groundwater conditions in the vicinity of <br />the mine site. A groundwater well search was undertaken within the project area <br />(CD", 2010). A review of well permits indicates that most wells are located within: <br />• Alluvial material of the La Plata River; <br />• Sandstone (undefined, presumed Morrison Formation) north of the fault system; <br />or <br />• Mancos Shale south of the Fault System. <br />Groundwater uses include: <br />• Domestic; <br />• Household; and <br />• Commercial. <br />The location of groundwater wells and a summary of the well permit data are presented <br />in Attachment T-2. <br />Based on the structural interpretation (Section 6.4.20(8)), there is no pathway from <br />groundwater beneath the permit area to groundwater receptors. <br />Reference: <br />CDWR (2010) Colorado's WellView Web hqp://www.dwr.state.co.us/WellViewWeb/. <br />Accessed June 24, 2010. <br />• <br />May Day Idaho Mine Complex 112(d) Permit Application <br />September 21, 2010 <br />10