Laserfiche WebLink
ALARMS <br /> #5 Shaft Hi-Level alarm condition will be transmitted to the mill control room to <br /> indicate a high water level in the #5 shaft. <br /> #5 Shaft Hi-Hi Level alarm condition will be transmitted to the mill control room to <br /> indicate a high high water level in the #5 shaft. <br /> #5 Shaft Manual Control alarm condition will be transmitted to the mill control room to <br /> indicate that the pump control system is in the manual mode. This mode of operation <br /> will prohibit the pumps from operating via the level control automatically. <br /> PUMP #1 ASD Fault alarm condition will be transmitted to the mill control room to <br /> indicate that a fault has occured on the pump #1 ASD motor control. <br />