|
SPECIMEN LABEL UPDATES AVAILABLE AT WWW'.GREENBOOK.NET 7
<br />0
<br />Product(2)
<br />Active Ingredient
<br />Formulation
<br />Amount of
<br />Product per Acre
<br />C 1 can +
<br />chlorsulfuron + 2,4 -D
<br />75% DF + 4
<br />1 /6 oz + 8 fluid oz
<br />4-D Amine or
<br />MCPA
<br />lb/gal
<br />(15 lb a.iJAX2)
<br />er(5)
<br />MCPA
<br />4 lb/gal
<br />8 -12 fluid oz
<br />ony
<br />(thifensulfuron +
<br />75% DF + 4
<br />1 /643 oz + 8 fluid oz
<br />xtra + 2,4-D
<br />tribenuroomethyl) +
<br />lb/gal
<br />VWVho oz
<br />Amine or
<br />2,4-D
<br />75% DF
<br />0.14-018 oz
<br />Ester(5)
<br />thifensulfuron+
<br />75% DF
<br />V]2-% OZ
<br />Roundup
<br />glyphosate
<br />3.0ib /gal
<br />12 -16 -fluid oz
<br />RT(6)
<br />chlotaulfuron +
<br />75% DF
<br />46 V2 oz
<br />(1) BANVEL may be used at 6 fluid ounces on fall seeded what in Western Oregon as a
<br />spring application grimy. In CO, KS, NM, OK and TX up to 8 fluid ounces of BANVEL may
<br />be applied on fail seeded what after it exceeds the 3 leaf stage for suppression of perennial
<br />weeds, such as field bindweed. Applications may be made in the fall following a frost but
<br />before a killing freeze. BANVEL may be tank mixed with 2,4-D amine at 8 fluid ounces
<br />after what begins to tiller. Periods of extended stress such as cold and wet weather may
<br />enhance the possibility of crop injury. For fall applications only, do not use if the potential
<br />for crop injury is not acceptable.
<br />(2) Do not use low rates of sulfonylures herbicides, such as Ally, Amber, Express, Finesse,
<br />Glean, and Harmony Extra on more mature weeds and/or on dense vegetative growth.
<br />(3) NOTE: For use on Fall Seeded Wheat nil . Do Not Use unless potential crop injury will
<br />be acceptable.
<br />(4) When using formulations other than 4 lb/gal use pounds active/acre listed.
<br />(5) Use for improved control of Russian thistle, flixweed, gromwell, mayweed and fiddleneck.
<br />(6) BANVEL may be applied at 2 fluid ounces with Roundup RT or any glyphosate
<br />formulation labeled for use as a preplant application to small grains with no waiting period
<br />prior to planting. Read and follow label directions of the tank mix product for adjuvant use
<br />recommendations.
<br />FALL SEEDED BARLEY
<br />BANVEL MUST BE APPLIED TO FALL SEEDED BARLEY PRIOR TO THE
<br />JOINTING STAGE.
<br />NOTE: For spring barley varieties that are seeded during the winter months or
<br />later, follow the [aces and timings given for Spring Seeded Barley.
<br />TANK MIX TREATMENTS
<br />ANVEL may be tank mixed with one or more, but not limited to, the following
<br />rbicides. Read and follow the label of each tank mix product used for pmcau-
<br />nary statements, directions for use, weeds controlled and geographic and other
<br />strictions.
<br />Broadcast rate per treated acre:
<br />Apply 2-4 fluid ounces BANVEL with:
<br />Product (1)
<br />Active Ingredient
<br />Formulation
<br />Amount of
<br />Product Per Acre
<br />2,4-D
<br />2,4-D
<br />4 lb/gal
<br />8 fluid oz
<br />Amine or Ester
<br />MCPA
<br />4 lb /gal
<br />(15 lb a.iJAX2)
<br />MCPA
<br />MCPA
<br />4 lb/gal
<br />8 -12 fluid oz
<br />Amine or Ester
<br />masulfuron
<br />75% DF
<br />(15 -375 lb a iJA)
<br />Ally
<br />metsulfuron- methyl
<br />60% DF
<br />VWVho oz
<br />Amber"
<br />triasulfuron
<br />75% DF
<br />0.14-018 oz
<br />Express
<br />thifensulfuron+
<br />75% DF
<br />V]2-% OZ
<br />tribenuron- methyl
<br />Finesse
<br />chlotaulfuron +
<br />75% DF
<br />46 V2 oz
<br />Harmony"
<br />metsulfuron- methyl
<br />75% DF
<br />V6- V2 oz
<br />Glean"
<br />cblorsulfuron
<br />75% DF
<br />V6 oz
<br />Harmony Extra
<br />thifettsulfuron+
<br />75% DF
<br />V6 -Vr oz
<br />Buctril
<br />tnbenuron- methyl
<br />2 lb/gal
<br />1-1 Ps
<br />Senor
<br />metnbuzin(3)
<br />75% DF
<br />1 -10 oz
<br />Buctril
<br />bromoxynd
<br />2 lb /gal
<br />1 -1 V2 pts
<br />Bronatc
<br />bromoxynil + MCPA
<br />4 lb /gal
<br />F4 -1 % pts
<br />(1) Do not use low rates ofsulfonylureas (Ally Amber", Express * , Finesse Glean * , and
<br />Harmony" Extra) on more mature weeds and/or on dense vegetative growth.
<br />(2) When using formulations other than 4 lb/gal use pounds active/acre listed.
<br />(3) Herbicides with the same active ingredient and/or different formulations may be used.
<br />SPRING SEEDED BARLEY
<br />BANVEL MUST BE APPLIED BEFORE SPRING SEEDED BARLEY EX-
<br />CEEDS THE 4 LEAF STAGE.
<br />Product (1)
<br />Active Ingredient
<br />Formulation
<br />Amount of
<br />Product Per Acre
<br />MCPA Aminc
<br />MCPA
<br />4 lb /gal
<br />8 -12 fluid oz
<br />or Ester
<br />MCPA
<br />4 lb /gal
<br />(15 -375 lb a.iJA)(2)
<br />Ally
<br />metsulfuron- methyl
<br />60% DF
<br />Via- hho oz
<br />Amber
<br />masulfuron
<br />75% DF
<br />0.14 -028 oz
<br />Express"
<br />thifensulfuron +
<br />75% DF
<br />V12-% oz
<br />tribauron- methyl
<br />Finesse
<br />ehlorsulfuron +
<br />75% DF
<br />V6- V2 oz
<br />metsulfuron- methyl
<br />Glan"
<br />chlorsulfuron
<br />75% DF
<br />1 4 oz
<br />Harmony"
<br />thifensulfuron +
<br />75% DF
<br />V6- V2 oz
<br />Extra
<br />tnbenuron- methyl
<br />Senor"
<br />metnbuzin (3)
<br />75% DF
<br />1 -10 oz
<br />Buctril
<br />bromoxynil
<br />2 lb/gal
<br />1-1 Ps
<br />Bronate"
<br />bromoxynil + MCPA
<br />4 lb /gal
<br />N -1 14 pts
<br />(1) Do not use low rates of sulfonylureas (Ally Amber Express ", Finesse Glenn and
<br />Harmony" Extra) on more mature weeds and/or on dense vegetative growth.
<br />(2) When using formulations other than 4 lb /gal use pounds active/acre listed.
<br />(3) Herbicides with the same active ingredient and/or different formulations may be used.
<br />FALL AND SPRING SEEDED OATS
<br />BANVEL MUST BE APPLIED BEFORE SPRING SEEDED OATS EXCEED
<br />THE 5 LEAF STAGE. APPLICATIONS TO FALL SEEDED OATS MUST BE
<br />MADE PRIOR TO. THE JOINTING STAGE.
<br />TANK MIX TREATMENTS
<br />BANVEL may be tank mixed with one or more of the following herbicides. Read
<br />and follow the label of each tank mix product used for precautionary statements,
<br />directions for use, weeds controlled, geographic and other restrictions.
<br />Broadcast rate per treated acre:
<br />Apply 2-4 fluid ounces BANVEL with:
<br />(1) When using formulations other than 4 lb /gal use pounds active/acre listed.
<br />FALL AND SPRING SEEDED TRITICALE
<br />EARLY SEASON APPLICATIONS
<br />Apply 1-4 fluid ounces of BANVEL to triticale.
<br />Early season applications to fall- seeded triticale must be made prior to jointing
<br />stage.
<br />Early season applications to spring - seeded triticale must be made before triticale
<br />reaches the 6 -leaf stage. .
<br />TANK MIXES
<br />For best performance, should be used in tank mix combination with bromoxynil.
<br />SUGARCANE
<br />Observe all precautions. Read and follow mixing and application instructions.
<br />Consult your local or state authorities for possible application restrictions, es-
<br />pecially concerning aerial applications and advice concerning special local use
<br />situations.
<br />WEEDS CONTROLLED
<br />BANVEL, when applied at recommended testes, will control many ANNUAL,
<br />BIENNIAL and PERENNIAL broadleaf weeds commonly found in sugarcane.
<br />(Refer to GENERAL WEED LIST).
<br />RATES AND TIMINGS
<br />Application of BANVEL may be made any time after weeds have emerged and
<br />are actively growing but before the close -in stage of sugarcane. Application rates
<br />and timing of BANVEL are given below. Use the higher level of listed rate ranges
<br />when treating dense vegetative growth.
<br />Broadcast Rate Per Treated Acre
<br />Weed Stage dt Type
<br />Amount of
<br />Product
<br />Active Ingredient
<br />Formulation
<br />Product Per Acre
<br />MCPA Amine
<br />MCPA
<br />4 lb /gal
<br />8 -12 fluid oz
<br />or Ester
<br />Vr-V4
<br />Biennial
<br />(25 -375 lb a iJA)(I)
<br />(1) When using formulations other than 4 lb /gal use pounds active/acre listed.
<br />FALL AND SPRING SEEDED TRITICALE
<br />EARLY SEASON APPLICATIONS
<br />Apply 1-4 fluid ounces of BANVEL to triticale.
<br />Early season applications to fall- seeded triticale must be made prior to jointing
<br />stage.
<br />Early season applications to spring - seeded triticale must be made before triticale
<br />reaches the 6 -leaf stage. .
<br />TANK MIXES
<br />For best performance, should be used in tank mix combination with bromoxynil.
<br />SUGARCANE
<br />Observe all precautions. Read and follow mixing and application instructions.
<br />Consult your local or state authorities for possible application restrictions, es-
<br />pecially concerning aerial applications and advice concerning special local use
<br />situations.
<br />WEEDS CONTROLLED
<br />BANVEL, when applied at recommended testes, will control many ANNUAL,
<br />BIENNIAL and PERENNIAL broadleaf weeds commonly found in sugarcane.
<br />(Refer to GENERAL WEED LIST).
<br />RATES AND TIMINGS
<br />Application of BANVEL may be made any time after weeds have emerged and
<br />are actively growing but before the close -in stage of sugarcane. Application rates
<br />and timing of BANVEL are given below. Use the higher level of listed rate ranges
<br />when treating dense vegetative growth.
<br />TANK MIX TREATMENTS
<br />ANVF-L may be mixed with one or more of the following herbicides. Read *Application crude over the top of actively growing sugarcane may result in crop injury.
<br />d follow the label of each tank mix product used for precautionary statements, When possible, direct the spray beneath the sugarcane canopy in order to minimize
<br />ections for use, weeds controlled and geographic and other restrictions. the likelihood of crop injury The use of directed sprays will also aid in maximizing
<br />spray coverage of weed foliage.
<br />roadcast rate per treated acre: Retreatments may be made as needed; however, do not exceed a total of 4 pints
<br />Apply 2 -3 fluid ounces BANVEL with: (2 lbs. a.i.) of BANVEL per treated acre during a growing season.
<br />Database and format copyright © by Vance Communication Corporation. All rights reserved.
<br />Broadcast Rate Per Treated Acre
<br />Weed Stage dt Type
<br />Product Amount
<br />Lim ad.
<br />Annual
<br />— Small, actively growing
<br />V2 -1 pt.
<br />V4-V2
<br />— Established weed growth
<br />1 -114 pts.
<br />Vr-V4
<br />Biennial
<br />1 -2 pts.
<br />1 /2-1
<br />Perennial
<br />2-4 pts.
<br />1 -2
<br />TANK MIX TREATMENTS
<br />ANVF-L may be mixed with one or more of the following herbicides. Read *Application crude over the top of actively growing sugarcane may result in crop injury.
<br />d follow the label of each tank mix product used for precautionary statements, When possible, direct the spray beneath the sugarcane canopy in order to minimize
<br />ections for use, weeds controlled and geographic and other restrictions. the likelihood of crop injury The use of directed sprays will also aid in maximizing
<br />spray coverage of weed foliage.
<br />roadcast rate per treated acre: Retreatments may be made as needed; however, do not exceed a total of 4 pints
<br />Apply 2 -3 fluid ounces BANVEL with: (2 lbs. a.i.) of BANVEL per treated acre during a growing season.
<br />Database and format copyright © by Vance Communication Corporation. All rights reserved.
<br />
|