Laserfiche WebLink
SPECIMEN LABEL UPDATES AVAILABLE AT %VWW.GREENBOOK.NET 5 <br />COTTON <br />PREPLANT APPLICATION: Apply up to 8 fluid ounces of BANVEL per acre <br />to control emerged broadleaf weeds prior to planting cotton in conventional or <br />conservation tillage systems. <br />or best performance, apply BANVEL when weeds are in the 24 leaf stage and <br />settee are less than 2" across. <br />llowing application of BANVEL and a minimum accumulation of 1 " of rainfall <br />overhead irrigation, a waiting interval of 21 days is required per 8 fluid ounces <br />er acre or less. These intervals must be observed prior to planting cotton. <br />Do not apply preplant to cotton west of the Rockies. <br />Do not make BANVEL preplan applications to geographic areas with average <br />annual rainfall less than 25 ". <br />If applying a spring preplan treatment following application of a fall preplant <br />(postharvest) treatment, then the combination of both treatments may not exceed <br />2 pounds acid equivalent per acre. <br />COTTON TANK MIXES <br />For control of grasses or additional broadleaf weeds, BANVEL may be tank mixed <br />with Bladexo, CaparoP, Gramoxonea Extra, and Roundup Ultras RT herbicides. <br />'Not for use in California. <br />SORGHUM (MILO) <br />Observe all precautions, including the reference to crops growing under stress. <br />Read and follow mixing and application instructions. <br />Applications of BANVEL to sorghum during periods of rapid growth may result <br />in temporary leaning of plants or rolling of leaves. These effects arc usually <br />outgrown within 10 to 14 days. <br />Do not graze or feed treated sorghum forage or silage prior to mature grain stage. <br />If sorghum is grown for pasture or hay, refer to the pasture use section of this <br />label. Do not apply BANVEL to sorghum grown for seed production. <br />Make no more than one application per growing season. <br />WEEDS CONTROLLED <br />BANVEL, when applied at the recommended rate for sorghum, will control many <br />actively growing ANNUAL broadleaf weeds and will reduce competition from <br />established PERENNIAL broadleafweeds as well as control their seedlings. (Refer <br />to GENERAL WEED LIST). <br />RATES AND TIMINGS <br />BANVEL may be applied to emerged and actively growing weeds at least 15 <br />days prior to planting. Postemergence application of BANVEL must be made <br />after sorghum is in the spike stage (all sorghum emerged) but before sorghum is <br />Winch" <br />all. For besleaf stage nd weles) if sorum is es and out f the y coverage of weed foliage. <br />Broadcast rate per treated acre: <br />Qapint ( lb. a.i. <br />�tabase and ormat copyright © by Vance Communication Corpor <br />TANK MIX TREATMENTS <br />BANVEL plus Atrazine: <br />For improved control of emerged, actively growing broadleaf weeds including <br />triazine resistant species and added suppression of perennial broadleaf weeds, <br />tank mix M pint BANVEL with 0.5 to 115 lbs. a.i. atrazine per treated acre. <br />For control of grasses (less than 1.5 inches tall), tank mix Vi pint BANVEL with <br />2 lbs. a.i. atrazine per treated acre. For best performance and minimal crop <br />injury, make application when sorghum is 3 -8 inches tall and when broadleaf <br />weeds are small (less than 6 inches tall). Application of atmzine must be made <br />before sorghum is beyond 12 inches tall. The atrazine rate will depend upon soil <br />texture and length of residual weed control desired. Follow all state and Federal <br />restrictions pertaining to atrazine applications. <br />BANVEL plus BuctriP: <br />For improved control of broadleaf weeds, tank mix th pint BANVEL with 1 -1 V <br />pint BuctriP herbicide per treated acre. Make application at 4 leaf to 15 -inch tall <br />sorghum. Use drop nozzles to direct spray beneath sorghum leaves when sorghum <br />is greater than 8 inches tall. <br />READ AND FOLLOW THE LABEL OF EACH TANK MIX PRODUCT USED <br />FOR PRECAUTIONARY STATEMENTS, DIRECTIONS FOR USE, APPLICA- <br />TION RATES AND TIMINGS, AND OTHER RESTRICTIONS. <br />OVERLAY (SEQUENTIAL) TREATMENTS <br />BANVEL may be applied to ground previously treated with one or more of the <br />following herbicides: <br />Herbicide <br />Preplant/Pre- <br />Pre - emergent <br />4 <br />(Screerr�-treated seed) <br />atrazine <br />emergent (No <br />(Conventional or <br />Early Post- Emergent <br />Late Post- Emergent (All <br />BANVEL Plus <br />tillage Corn) <br />Reduced Tillage Cora) <br />(All Tillage Systems) <br />Tillage Systems) <br />Additional Directions <br />rowl (pendimcthalin) <br />— <br />-% - I $ lbs a.iJA (Use <br />3 /4 -1 V2 lbs a.iJA <br />— <br />Application may be made immediately <br />only on fine or medium <br />after planting but prior to weed <br />textured soils with <br />emergence. Coin should not be beyond <br />2 6% or greater organic <br />the 2 -leaf stage of growth. <br />matter.) <br />Roundup (glyphosete) <br />1.0 -3.0 lbs aJJA <br />1.0 -3.0 lbs a.iJA <br />— <br />— <br />Application may be made to emerged <br />weeds but prior to corn emergence. <br />Stinger (clopyralid) <br />0.035 -0.07 lb a.iJA <br />0.035 -0.07 lb a.iJA <br />Applications may be made any time <br />after corn emergence through 24 -inch <br />tall corn. Use drop nozzles to direct <br />spray after corn exceeds the 8 -inch <br />stage. Apply when the majority of the <br />thistle- plants have emerged and are at <br />least 4 inches in height, but before bud <br />stage. Use higher rates listed for stand <br />reduction of larger thistle plants or <br />heavier infestations. Lower rates listed <br />may provide seasonal thistle suppression <br />only. <br />Tough 3.75 EC <br />0.47 lb aiJA <br />0.47 -0.94 lb s.iJA <br />Applications may be made to emerged, <br />(pyridete) <br />actively growing weeds. Directed <br />applications are recommended when <br />coin is large enough to prevent spray <br />coverage. <br />2,4-D <br />V4 - lb a.iJA <br />V4- V1 lb aiJA <br />Not recommended <br />tU lb aiJA <br />Drop pipes arc to be used when corn <br />height is 8 inches or greater. Keeping <br />the spray off the corn leaves and out of <br />the whorl will reduce the likelihood of <br />crop injury and improve spray coverage <br />of weed foliage. <br />COTTON <br />PREPLANT APPLICATION: Apply up to 8 fluid ounces of BANVEL per acre <br />to control emerged broadleaf weeds prior to planting cotton in conventional or <br />conservation tillage systems. <br />or best performance, apply BANVEL when weeds are in the 24 leaf stage and <br />settee are less than 2" across. <br />llowing application of BANVEL and a minimum accumulation of 1 " of rainfall <br />overhead irrigation, a waiting interval of 21 days is required per 8 fluid ounces <br />er acre or less. These intervals must be observed prior to planting cotton. <br />Do not apply preplant to cotton west of the Rockies. <br />Do not make BANVEL preplan applications to geographic areas with average <br />annual rainfall less than 25 ". <br />If applying a spring preplan treatment following application of a fall preplant <br />(postharvest) treatment, then the combination of both treatments may not exceed <br />2 pounds acid equivalent per acre. <br />COTTON TANK MIXES <br />For control of grasses or additional broadleaf weeds, BANVEL may be tank mixed <br />with Bladexo, CaparoP, Gramoxonea Extra, and Roundup Ultras RT herbicides. <br />'Not for use in California. <br />SORGHUM (MILO) <br />Observe all precautions, including the reference to crops growing under stress. <br />Read and follow mixing and application instructions. <br />Applications of BANVEL to sorghum during periods of rapid growth may result <br />in temporary leaning of plants or rolling of leaves. These effects arc usually <br />outgrown within 10 to 14 days. <br />Do not graze or feed treated sorghum forage or silage prior to mature grain stage. <br />If sorghum is grown for pasture or hay, refer to the pasture use section of this <br />label. Do not apply BANVEL to sorghum grown for seed production. <br />Make no more than one application per growing season. <br />WEEDS CONTROLLED <br />BANVEL, when applied at the recommended rate for sorghum, will control many <br />actively growing ANNUAL broadleaf weeds and will reduce competition from <br />established PERENNIAL broadleafweeds as well as control their seedlings. (Refer <br />to GENERAL WEED LIST). <br />RATES AND TIMINGS <br />BANVEL may be applied to emerged and actively growing weeds at least 15 <br />days prior to planting. Postemergence application of BANVEL must be made <br />after sorghum is in the spike stage (all sorghum emerged) but before sorghum is <br />Winch" <br />all. For besleaf stage nd weles) if sorum is es and out f the y coverage of weed foliage. <br />Broadcast rate per treated acre: <br />Qapint ( lb. a.i. <br />�tabase and ormat copyright © by Vance Communication Corpor <br />TANK MIX TREATMENTS <br />BANVEL plus Atrazine: <br />For improved control of emerged, actively growing broadleaf weeds including <br />triazine resistant species and added suppression of perennial broadleaf weeds, <br />tank mix M pint BANVEL with 0.5 to 115 lbs. a.i. atrazine per treated acre. <br />For control of grasses (less than 1.5 inches tall), tank mix Vi pint BANVEL with <br />2 lbs. a.i. atrazine per treated acre. For best performance and minimal crop <br />injury, make application when sorghum is 3 -8 inches tall and when broadleaf <br />weeds are small (less than 6 inches tall). Application of atmzine must be made <br />before sorghum is beyond 12 inches tall. The atrazine rate will depend upon soil <br />texture and length of residual weed control desired. Follow all state and Federal <br />restrictions pertaining to atrazine applications. <br />BANVEL plus BuctriP: <br />For improved control of broadleaf weeds, tank mix th pint BANVEL with 1 -1 V <br />pint BuctriP herbicide per treated acre. Make application at 4 leaf to 15 -inch tall <br />sorghum. Use drop nozzles to direct spray beneath sorghum leaves when sorghum <br />is greater than 8 inches tall. <br />READ AND FOLLOW THE LABEL OF EACH TANK MIX PRODUCT USED <br />FOR PRECAUTIONARY STATEMENTS, DIRECTIONS FOR USE, APPLICA- <br />TION RATES AND TIMINGS, AND OTHER RESTRICTIONS. <br />OVERLAY (SEQUENTIAL) TREATMENTS <br />BANVEL may be applied to ground previously treated with one or more of the <br />following herbicides: <br />Herbicide <br />Maximum Rate Per Treated Acre (lbs. a.1.) <br />alechlor (LiaaO <br />4 <br />(Screerr�-treated seed) <br />atrazine <br />2.5 <br />metolachlor (Dual <br />2.5 <br />(Concep treated seed) <br />propachlor (R—od <br />5 <br />'Maximum use rate for atrazine is determined by soil type, tillage practices used, surface <br />residue, and state or local restrictions. Follow the more restrictive requirements when deter- <br />mining the maximum use rate for siazine. <br />PREHARVEST USES <br />FOR USE ONLY IN THE STATES OF TEXAS AND OKLAHOMA <br />BANVEL may be applied for weed suppression any time after the sorghum has <br />reached the soft dough stage. An agriculturally approved surfactant may be used to <br />improve performance. For aerial applications use at least 2 gallons of water -based <br />carrier per treated acre. <br />Delay harvest until 30 days after treatment. <br />Broadcast rate per treated acre: <br />ttor rights reserved. <br />