Laserfiche WebLink
w Mr. Nathan Wiser ENV031.10 <br />August 5, 2010 <br />Page 2 <br />Well Status Long String Status Short String Comment <br />29-27 (CO3858-04574) Bridge Plug Set? MIT in 2010 <br />il. Bridge Plug Set MIT in 2010 <br />29 28 (CO3858 04575) gad `Atin o . / E9 ' <br />Bridge Plug Set MIT in 2010 <br />29-29 (C03858-04576)Bridge Plug Set MIT:in 2010,. <br />Bridge Plug Set tv11T in 2010 , <br />29 34 (CO3858-04577.): Bridge Plug Set , MIT.iri 2010 <br />Bridge Plug Set - MIT in 2010- <br />.„ 5. <br />29-78 (C03858-04657) - --Its ged&??4t?a?ilo e_ / <br />Bridge Plug Set MIT in 201 Q; . <br />The data from the testing will be charted on an independent chart recording that shows the <br />pressure up and pressure release at the end of each half-hour test. During the testing we <br />will apply no less than 300 psi during the pressure up, then lock the pressure in by closing <br />the valve between the pressure source and the well, and wait no less than 30 minutes per <br />test. A "pass" results if there is less than 10% change over the half hour. The data for <br />each well will be recorded on the MIT form you sent in 2008. These forms and copies of <br />the independent chart recordings will be sent to your office once all of the testing is <br />complete. <br />Should you have any questions or comments regarding this information please contact me <br />at (970) 285-0428 or Celina Akin at (970) 285-0406. <br />Sincerely, <br /> <br />Todd Wilson <br />Plant Manager <br />TW/CMA <br />Cc: Kent Walter, BLM <br />Travis Marshall, DRMS