2010-05-04_PERMIT FILE - C1982057A

• Permit No: C1982057A
• IBM Index Class Name: Permit File
• Doc Date: 5/4/2010
• Doc Name: Current Hydrologic Monitoring Program
• Section_Exhibit Name: Tab 15 Appendix 15-3A
• Media Type: D
• Archive: Yes

Annual = May /July (for Springs)
Water samples will be analyzed according to the (A) Surface Water Long Parameter List (Table 2)
or the (B) Surface Water Short Parameter List (Table 2a). Spoil springs will be incorporated into
the hydrologic monitoring program as they develop.
A survey will be conducted each year following the snowmelt, and the locations of all spoil
springs with discharges of at least 5 GPM will be reported to DMG in the next successive AHR.
Monitoring frequencies for spoil springs will be the same as those for above listed existing
springs.
NOTE: For all springs (native), spoil springs, and stream sites, when sampling for the Surface
Water Parameter Lists is required and flow is less than 5 gpm, only field parameters will be
measured.
•
TR -69 15 -3a -5 Revised 2/10
TABLE 1 (cont.)
Springs
Monitoring
Frequency
Site Number
Discharge
Water Quality
Comments
(Computer ID)
S -7 (WSPG7)
Annual
Annual - A
At Smith Homestead
S -46 (WSPG46)
Annual
Annual - A
At 005 Dam
S -47 (WSPG47)
Annual
Annual - B
At Weather Station
S -50 (WSPG50)
Annual
Annual - A
Well W -24 French Drain
Spoil Spring 1
Annual
Annual - B
At D Pit
(WSSPGI)
Spoil Spring 2
Annual
Annual - A
Below Oil Well
(WSSPG2)
Spoil Spring 3
Annual
Annual - A
Above 006 Pond
(WSSPG3)
Spoil Spring 4
Annual
Annual - A
At Pond 006 Inlet Culvert
(WSSPG4)
Spoil Spring 5
Annual
Annual - A
At Pond 16A Inlet Culvert
(WSSPG5)
Annual = May /July (for Springs)
Water samples will be analyzed according to the (A) Surface Water Long Parameter List (Table 2)
or the (B) Surface Water Short Parameter List (Table 2a). Spoil springs will be incorporated into
the hydrologic monitoring program as they develop.
A survey will be conducted each year following the snowmelt, and the locations of all spoil
springs with discharges of at least 5 GPM will be reported to DMG in the next successive AHR.
Monitoring frequencies for spoil springs will be the same as those for above listed existing
springs.
NOTE: For all springs (native), spoil springs, and stream sites, when sampling for the Surface
Water Parameter Lists is required and flow is less than 5 gpm, only field parameters will be
measured.
•
TR -69 15 -3a -5 Revised 2/10