Laserfiche WebLink
such as routing water away from a coal waste pile, will remain after <br />final reclamation. Minor modifications to permanent ditches may be <br />made to improve their function and stability prior to the end of the <br />liability period. Reclamation of ditches will involve minimal backfill and <br />regrading work since the material excavated for their construction is <br />generally placed adjacent to the ditch. The ditches will be backfilled <br />with this material, graded to blend with the surrounding terrain, and <br />revegetated. <br />Topsoil Removal, Storage, and Redistribution Plan <br />Topsoil removal and storage methods and procedures are presented in <br />Section 2.05.3 of the permit application. Based on the estimated <br />topsoil quantity to be recovered, Northfield proposes to construct <br />topsoil stockpiles north of the proposed facilities area and adjacent to <br />the ventilation shaft sites. When topsoil salvage is completed, <br />Northfield will survey and determine the actual volume of all stockpiled <br />topsoil. Upon completion of stockpile surveys, Northfield will submit <br />the survey data to the Division, and document the data in the topsoil <br />stockpile information included in this section. An estimated volume of <br />topsoil to be stockpiled, and areas of topsoil salvage, are shown below <br />on Table 2.05.4 -1, Topsoil Sources /Stockpile. All stockpiled topsoil will <br />be placed on all mining related disturbance at the facilities and <br />adjacent areas after the areas are backfilled and graded. <br />The estimated topsoil thickness in the facilities and associated <br />disturbed areas averages approximately 6 inches based on field <br />sampling results. Northfield plans to recover a total of ten (10) inches <br />of soil materials during construction of mine facilities. The topsoil (6 <br />inches) and underlying subsoil materials (4 inches) will be removed <br />and blended during construction of the stockpile. Actual recovery <br />depths will documented during the construction activities. The actual <br />average depth of recovered topsoil will become the required depth to <br />be replaced during site reclamation. <br />Prior to topsoil replacement, regraded areas left in a roughened <br />condition will be ripped to a depth of approximately 1 to 2 feet to <br />reduce the compaction resulting from heavy equipment travel. Topsoil <br />will then be redistributed utilizing either tractor scrapers, wheel <br />loaders, trucks, tracked dozers, or motor graders as appropriate to <br />transport and spread the soil material to a generally uniform depth. <br />These operations will be closely monitored to ensure uniform <br />replacement thicknesses on all disturbed areas. Maintaining the correct <br />replacement thickness will also guarantee that sufficient stockpiled <br />i topsoil will remain for later reclamation of any remaining <br />2.05.4 -6 Revised 12/04/09, TR -01 <br />