Laserfiche WebLink
a-Ml <br />L a b o r a t o r i e s <br />CASE NARRATIVE / CONFORMANCE SUMMARY <br />Client: Nuvemco, LLC Job No D12928 <br />Site: Last Chance Report Dat 5/26/2010 10:06:34 AM <br />On 04/30/2010, three (3) samples were received at Accutest Mountain States at a temperature of 18.9 °C. The samples were intact <br />and properly preserved, unless noted below. An AMS Job Number of D12928 was assigned to the project. The lab sample IDs, <br />client sample IDs, and dates of sample collection are detailed in the report's Results Summary. <br />Specified quality control criteria were achieved for this job except as noted below. For more information, please refer to the analytical <br />results and QC summary pages. <br />Metals ByMethod SW846 6010B <br />Matrix LEACHATE Batch ID: MP1862 <br />® All samples were digested and analyzed within the recommended method holding time. <br />o All method blanks for this batch meet method specific criteria. <br />® Samples D12928-1MS and D12928-1MSD were used as the QC samples for metals analysis <br />Metals By Method SW846 6020 <br />Matrix AQ Batch ID: MP1883 <br />® All samples were digested and analyzed within the recommended method holding time. <br />® All method blanks for this batch meet method specific criteria. <br />m Samples D12928-1MS and D12928-1MSD were used as the QC samples for metals analysis. <br />Metals ByMethod SW846 7470A <br />Matrix LEACHATE Batch ID: MP1864 <br />® All samples were digested and analyzed within the recommended method holding time. <br />® All method blanks for this batch meet method specific criteria. <br />® Samples D12928-1MS and D12928-1MSD were used as the QC samples for metals analysis. <br />AMS certifies that data reported for samples received, listed on the associated custody chain or analytical task order, were produced <br />to specifications meeting AMS's Quality System precision, accuracy and completeness objectives except as noted. <br />Estimated non-standard method measurement uncertainty data is available on request, based on quality control bias and implicit for <br />standard methods. Acceptable uncertainty requires tested parameter quality control data to meet method criteria. <br />AMS is not responsible for data quality assumptions if partial reports are used and recommends that this report be used in its entirety. <br />This report is authorized by AMS indicated via signature on the report cover. <br />Wednesday, May 26, 2010 Page 1 of 1 <br />4 of 33 <br />MACCUTEBT. <br />D12928 Lab-tories