2010-05-07_PERMIT FILE - C2009087 ‎(45)‎

• Permit No: C2009087
• IBM Index Class Name: Permit File
• Doc Date: 5/7/2010
• Doc Name: Turf Reinforcement Mat Design & Installation Information
• Section_Exhibit Name: Exhibit 2.05.3-E2 Appendix 2.05.3-E2.G Attachment 2.05.3-E2.G-3
• Media Type: D
• Archive: No

CO LBC0% N D E 7018 RM
• Root Reinforcement Mat
Description
Enkamat 7018 is a three - dimensional turf reinforcement mat (TRM) made of continuous
Ninety -five (95 %) percent of the Enkamat is
monofilaments fused at their intersections.
open and available for soil, mulch and root interaction with filaments, creating the most
effective Root Reinforcement Mat (R 2 M) available. Enkamat is manufactured from nylon
conditions and provide per-
to eliminate the buoyancy factor associated with submerged
in vegetated channels as well as on slopes
manent TRM protection
Recommended
Permanent erosion control for Green (vegetated) channels with expected shear
Applications
stresses <_ 9 psf.
• Permanent erosion control for slight to moderate slopes ( <_ 2H:1V).
. Support and enhance performance of Ecosystem plants.
Fiber Matrix (BFM) and other mulches for
. Substrate for hydraulically applied Bonded
erosion control applications where low water flow and low to moderate shear stresses
are expected.
Technical Data
_....:.. .:,TypicAL 611 "Value.:::;:
Mecharncal Prope,rttes ,Test.Method ; ::::::.:. .::..:.nl. :"; ...Mp CD
ASTM D 5035 kN /m (Ibs /ft) 2.2(150) 1.3(90)
Tensile Strength modified
Thickness ASTM D 5199 mm (in) 16.5 (0.65)
Mass /Unit Area ASTM D 5261 g /m (oz/yd 290 (8.6)
ASTM D G53 / % strength 80
•
UV Stability ASTM D 5035 retained
(modified)
..,:
,;.,.;
a aI;RoII.Value;.
P'e .f .
Permissible Velocity
Product Only Flume test' m/s (ft/s) 6.1 (20)
30 minute, vegetated Flume test' m/s (ft/s) 5.8(19)
50 hour, vegetated Flume test' m/s (ft/s) 4.2(14)
Permissible Shear Stress
Flume test' kN /m (Ibs /ft 0.53 ( )
Product Only
9.0
30 minute, vegetated Flume test' kN /m Z (Ibs /ft) 0.43 ( (9.0 )
50 hour, vegetated Flume test' kN /m (Ibs /ft 0.34 (7.0)
packaging Data
Colbond Inc.
• Box
En 28
Enka, NC 28728
Tel 800 - 365 -7391
Fax [phone]
www.colbond- usa.com
Estimated Roll Diameter cm (in)
109 (43) 61 (24)
Estimated Roll Weight kg (lb) 25 (54) 15 (34)
To the best our knowledge, the information contained herein is accurate. However, Colbond Inc. cannot assume any liabil-
ity whatsoever for the accuracy or completeness thereof. Final determination of the suitability of any information or material
for the use contemplated, of its manner of use and whether the suggested use infringes any patents is the scl d ne. 20040
ity of the user.
0912004
CIV7018TDS03
1. Flume test pefforned at Independent laboratory --data and details available upon request.