Laserfiche WebLink
Analyst Approved <br />QuiliHers: D - AnaI34e detected in the associated Method Blank, value not subtracted from result Definitions. NA- Not Applicable <br />E - Extrapolated value.Value exceeds calibration range LQL - Lower Quantitation Limit <br />I3 - Sample analysis exceeded analytical holding time Surr - Surrogate <br />w 7 - Indicates an estimated value when the compound is detected, but is below the LQL <br />S - Spike Recovery outside accepted limits <br />U - Compound analyzed for but not detected <br />X - See case narrative <br />* -Value exceeded the Maximum Contamination Level (MCL), TCLP limit, or if <br />compound is undetected, LQL exceeds MCL. Print Date: 11 /1112008 <br />Evergreen Analytical, <br />Inc. <br />4036 YoungField Street, Wheat Ridge, Colorado 80033 -3862 <br />(303) 425-6021 <br />Client Sample ID: MMW1 <br />Lab Work Order <br />08 -7641 <br />Client Project ID: MMW #1 <br />Lab Sample ID: <br />08- 7641 -01 <br />Date Collected- 10 /2/08 <br />Sample Matrix: <br />Groundwater <br />Date Received: 10/3/08 <br />MERCURY, TOTAL <br />Method: E245.1 <br />Prep Method: <br />E245.1 <br />Date Prepared: 10/8108 <br />Lab File ID: 100908 <br />Dilution Factor: I <br />Date.Anal3mcd: 1019108 <br />Method Blank: MB -16934 <br />Lab Fraction ID: 08- 7641 -01A <br />w Analytes <br />CAS Number <br />Result <br />LQL <br />Units <br />Mercury <br />7439 -97-6 <br />U <br />0.000100 <br />mg/L <br />TOTAL METALS <br />Method: SW601013 <br />Prep Method: <br />E200.7/SW3010A <br />Date Prepared: 1017/08 <br />Lab File ID: 100808AM <br />Dilution Factor: I <br />Date Analyzed: 10/9/08 <br />Method Blank: MB -16928 <br />Lab Fraction ID: 08- 7641 -01A <br />Analytes <br />CAS Number <br />Result <br />LQL <br />Units <br />Arsenic <br />7440 -38 -2 <br />U <br />0.050 <br />mg/L <br />Barium <br />7440-39-3 <br />0.54 B <br />0.0015 <br />mg/L <br />Cadmium <br />7440 -43 -9 <br />U <br />0.0080 <br />mg/L <br />Calcium <br />7440 -70 -2 <br />560 <br />0.39 <br />mg/L <br />Copper <br />7440 -50 -8 <br />0.091 <br />0.0050 <br />mg/L <br />Iron <br />7439 -89 -6 <br />19 <br />0.070 <br />mg/L <br />Lead <br />7439 -92 -1 <br />U <br />0.070 <br />mg/L <br />Magnesium <br />7439 -95-4 <br />140 <br />0.15 <br />mg/L <br />Manganese <br />7439 -96 -5 <br />0.89 B <br />0.0050 <br />mg(L <br />Molybdenum <br />7439 -98 -7 <br />0.094 <br />0.0050 <br />mg/L <br />Nickel <br />7440 -02 -0 <br />U <br />0.030 <br />mg/L <br />_ Potassium <br />7440 -09 -7 <br />44 B <br />0.34 <br />zng/L <br />Selenium <br />7782 -49 -2 <br />U <br />0.10 <br />mg/L <br />Sodium <br />7440 -23 -5 <br />180B <br />0.40 <br />mg/L <br />Uranium <br />7440 -61 -1 <br />0.38 <br />0.050 <br />mg/L <br />Vanadium <br />7440-62-2 <br />0.40 <br />0.010 <br />mg/L <br />Zinc <br />7440 -66-6 <br />0.32 <br />0.0330 <br />mg/L <br />Analyst Approved <br />QuiliHers: D - AnaI34e detected in the associated Method Blank, value not subtracted from result Definitions. NA- Not Applicable <br />E - Extrapolated value.Value exceeds calibration range LQL - Lower Quantitation Limit <br />I3 - Sample analysis exceeded analytical holding time Surr - Surrogate <br />w 7 - Indicates an estimated value when the compound is detected, but is below the LQL <br />S - Spike Recovery outside accepted limits <br />U - Compound analyzed for but not detected <br />X - See case narrative <br />* -Value exceeded the Maximum Contamination Level (MCL), TCLP limit, or if <br />compound is undetected, LQL exceeds MCL. Print Date: 11 /1112008 <br />