2009-09-25_PERMIT FILE - M2009076 ‎(24)‎

• Permit No: M2009076
• IBM Index Class Name: PERMIT FILE
• Doc Date: 9/25/2009
• Doc Name: New 110d DMO Appl.- Part III
• From: Venture Resources, Inc.
• To: DRMS
• Media Type: D
• Archive: No

AERO® 317 Xanthate MSDS: 0000632 Date: 10/22/2004 Page 3 of 7
is Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
7. HANDLING AND STORAGE
HANDLING
Precautionary Measures: Avoid excessive heat or moisture. Avoid contact with eyes, skin and clothing. Avoid
breathing dust. Keep container closed. Wash thoroughly after handling. Use non-sparking tools and do not smoke
when opening drum. Use with adequate ventilation. Contains finely divided material. Dust suspended in air may ignite
with static discharge, sparks or flame. Equipment, including venting systems, should be grounded. Provide adequate
ventilation in areas of use to remove dust. Wash contaminated clothing before reuse.
Special Handling Statements: Minimize dust. Special precautions against fire and explosion must be observed in
(1) pumping xanthate solutions, (2) draining mobile tanks, (3) cleaning mobile tanks, and (4) performing maintenance
work on storage tanks and pipelines leading to and from tanks. Use nonsparking tools and do not smoke when
opening drums of xanthate. DUST EXPLOSION HAZARD CLASS - 2 Handling of material should be in accordance
with standards for venting of deflagrations (e.g. NFPA-68). If handled with flammable or combustible materials the
explosion hazard may increase.
STORAGE
Heating or overexposure to moisture of solid xanthates or heating or aging of xanthate solutions causes some
decomposition to poisonous and flammable carbon disulfide. Storage tanks should have certain design features for
maximum safety, and the vapor space should be free of sources of ignition.
Storage Temperature: Store at <32.2 - 10 °C 90 - 50 °F
Reason: Safety
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Where this material is not used in a closed system, good enclosure and local exhaust ventilation should be provided
to control exposure.
Respiratory Protection:
Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures
exceed the established exposure limit, use respiratory protection recommended for the material and level of
exposure.
Eye Protection:
Wear eye/face protection such as chemical splash proof goggles or face shield. Eyewash equipment and safety
shower should be provided in areas of potential exposure.
Skin Protection:
Avoid skin contact. Wear impermeable gloves and suitable protective clothing.
Additional Advice:
Food, beverages, and tobacco products should not be carried, stored, or consumed where this material is in use.
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
9. PHYSICAL AND CHEMICAL PROPERTIES
. Color: yellow-green
Appearance: pellets or powder
Odor: disagreeable