Laserfiche WebLink
Additional Sheet <br />2009 Annual report <br />Canyon Dolomite Quarry <br />M-1977-376 <br />Continental Materials Corporation <br />Anniversary Date: September 22 <br />Overview of Permit Year: During the 2008/2009 operating year no mining occurred. Material was loaded out of <br />stockpiles only and no material processing occurred. Work continues with regard to a long term mining and <br />reclamation plan for the site. <br />Annual Report Maps: There are two annual report maps included in this report. Map I shows the extent of the <br />disturbance on the site as divided into two categories in the context of the entire site. Any land that is not color <br />shaded is unaffected by the mining operation. Map 2 focuses on the specific areas where mining is or has <br />occurred. Map 1 has a scale of I" = 900' and Map 2 has a scale of 1" = 500'. <br />Affected Lands: All disturbances in the last year were within previously disturbed land. No new unaffected land <br />was affected. The acreage of land within the recent disturbance category is 18.24. The acreage of disturbance <br />created by previous mining, including very old, pre-law mining is 46.46. It is important to note that this total of <br />64.7 acres was all disturbed by previous operators'. That is, no new undisturbed land has been disturbed since the <br />current permitttee took over the operation. <br />Work Anticipated in 200812009: Any additional mining will be done within the mining area already disturbed. It <br />is not expected that much material will be extracted until the new mining and reclamation plans are developed. <br />There may be a slight expansion of the current working face, but that expansion would likely not exceed a few tens <br />of ffeet to the south. Until an approach can be developed to efficiently mine and reclaim the site is developed, <br />disturbance of any new land will not occur and additional disturbance will be limited in extent. <br />Bonding: This operation is covered under a surety bond provided to Continental Materials by Willis HRH and <br />submitted to DRMS in June of 2009