Laserfiche WebLink
Page 125 <br />Construction Materials Rule 6 <br />(b) must be prepared and signed by a registered land surveyor, <br />professional engineer, or other qualified person; <br />(c) give date prepared; <br />(d) identify and outline the area which corresponds with the application; <br />(e) with the exception of the map of the affected lands required in <br />Section 34-32.5-112(2)(d), C.R.S. 1984, as amended, shall be <br />prepared at a scale that is appropriate to, clearly show all elements <br />that are required to be delineated by the Act and these Rules. The <br />acceptable range of map scales shall not be larger than 1 inch = 50 <br />feet nor smaller than 1 inch = 660 feet. Also, that a map scale, <br />appropriate legend, map title, date and a north arrow shall be <br />included. <br />110,111 <br />6.3. SPECIFIC PERMIT APPLICATION EXHIBIT REQUIREMENTS.- 110 OR, 110(6) <br />LIMITED IMPACT and 111 SPECIAL OPERATIONS <br />6.3.1 EXHIBIT A Legal Description and Location Map <br />(1) The legal description must identify the affected land, specify <br />affected areas and be adequate to field locate the property. <br />Description shall be by (a) township, range,, and section, to at least <br />the nearest quarter-quarter section, and (b) location of the.main <br />entrance to the mine site reported as latitude and longitude, or the <br />Universal Transverse Mercator (UTM) Grid as determined from a <br />USGS topographic map. A metes and bounds survey description is <br />acceptable in lieu of Township, Range, and Section. Where <br />available, the street address or lot number(s) shall be given. This <br />information may be available from the County Assessor's office or <br />U.S. Geological Survey (USGS) maps. <br />(2) The main entrance to the mine site shall be located based on a <br />USGS Topographic map showing latitude and longitude or <br />Universal Transverse Mercator (UTM). The operator will need to <br />specify coordinates of latitude and longitude in degrees, minutes