Laserfiche WebLink
amec'? <br />J <br /> Low Volume Solution Collection Fill, Bedding <br />Test and Fill, Leak Detection Fill, Soil Liner Drain Cover <br />ASTM and Pipe Bedding Fill Fill Fill <br />Designation (c (c c <br />Compaction -- 5,000 -- <br />(ASTM D698) <br /> <br />Particle Size2 10,000 5,000 20,000 <br />(ASTM C 117, C 136, <br />D 1140) <br /> <br />Atterberg Limit 10,000 5,000 20,000 <br />(ASTM D4318) <br />Moisture Content3 10,000 500 20,000 <br />(ASTM D2216) <br />Permeability4 5,000 <br />-- <br />(ASTM D5084/2434) <br /> <br />Nuclear Density -- 500 -- <br />• 1. Tests shall be performed at the specified frequency or one per material type, whichever is greater. <br />2. Use the USCS for description and identification (ASTM D2488). <br />3. In-place Moisture Content. <br />4. If the permeability of Soil Liner Fill is higher than 9.0x10-7 cm/sec, an additional permeability test will be <br />performed on a sample located within a 10 foot radius of the sample in question. If the permeability of the <br />Soil Liner Fill is higher than 1.0x10-6 cm/sec, 4 additional samples will be obtained from with 135,000 <br />square foot area centered about the failing test. This testing sequence will be repeated if additional failing <br />permeability tests are measured. <br />*** END OF SECTION *** <br />C7 <br />Section 01400.1 Page 9 of 9 <br />Earthworks CQA Plan <br />SAProjects\1125 CC&V Phase 5 VLF\I - Tech Specs\Arequa IFC Specs\01400.1.r1.doc <br />September 3, 2008 <br />Revision 1