2009-07-15_REVISION - M1980244 ‎(23)‎

• Permit No: M1980244
• IBM Index Class Name: REVISION
• Doc Date: 7/15/2009
• Doc Name: QA Mon. & Test Results Load Out- Bin Location
• From: CC&V
• To: DRMS
• Type & Sequence: AM9
• Media Type: D
• Archive: No

•
0
•
Cripple Creek & Victor Gold Mining Company
Cresson Project
Quality Assurance Monitoring and Test Results
Load Out Bin Relocation
July 7, 2009
1.0 INTRODUCTION
ameO
Cripple Creek & Victor Gold Mining Company (CC&V) operates the Cresson Project, located in
Teller County, Colorado, near the city of Victor. The Cresson Project is a mining and ore
processing and beneficiation facility that is composed of surface mines as well as a valley leach
facility (VLF); an adsorption, desorption, and recovery (ADR) plant; and associated
infrastructure, all of which were designed and constructed to meet or exceed the requirements
established by CRS §34-32-101 et seq. and regulations promulgated there under by the Mined
Land Reclamation Board (MLRB).
The work associated with the Cresson Project is being performed under specific criteria
established in Amendment No. 8 of Permit Number M-1980-244 (Permit), as approved by the
MLRB. This Report documents the Construction Quality Assurance (CQA) and Construction
Quality Control (CQC) services provided by AMEC Earth and Environmental (AMEC) from
March 2009 through May 2009 for the relocation of the VLF Load Out Bin (LOB). The general
LOB Relocation site plan is presented on Figure 1, and the LOB pad certification boundary is
presented on Figure 2.
1.1 Project Description
The existing Cresson Project was constructed in phases from 1994 through 2004 (Phases I
through IV). Phases I and II were permitted in 1994 and constructed during the 1994 through
1996 construction seasons. Phase III was permitted in 1999 and construction was initiated the
same year, with completion in 2000. Phase IV was permitted in 2000 and construction was
completed in 2004. Phase 5 was permitted in 2008 and is currently under construction. As part
of the construction activities, the LOB is being moved from its current location to a new pad
located to the north end of the VLF, as shown on Figure 2.
1.2 Construction Quality Assurance/Quality Control
AMEC provided CQA and CQC monitoring and testing services, and prepared this report
describing the monitoring and test results for the LOB relocation. As-built drawings and
supporting CQA and CQC monitoring and testing documentation are presented in appendices
attached to this report.
SAPROJECTS11125E CCV CQA\H3 - CONSTRUCTION\LOB CERT REPORTTREPORT BODY\LOB CERT REPORT 2009.07.07.DOC