Laserfiche WebLink
FROM : <br />FAX NO. : Mar. 03 2009 05:21PM P2 <br />0. <br />Global Minimums <br />Wjhoo: bishop simolifig_d <br />FS: 1.922380 <br />Center: 50.815, 63.055 <br />Radius: 51.697 <br />Left Slip Surface Endpoint: 5.719, 37.778 <br />Right Slip Surface Endpoint: 59.270, 12.055 <br />Resisting Moment=1.897e+006 lb-ft <br />Driving Moment=986801 lb-ft <br />Metho : ianbu simplified <br />FS: 1.774770 -- ?? n • FS <br />Center. 48.016, 67.457 <br />Radius: 46.630 <br />Left Slip Surface Endpoint: 5.746, 37.768 <br />Right Slip Surface Endpoint: 58.790, 12.089 <br />Resisting Horizontal Force=34545.6 lb <br />Driving Horizontal Force=19464.9 lb <br />Valid-1 Invalid Surfaces <br />I ish0D simplified <br />Number of Valid Surfaces: 4072 <br />Number of Invalid Surfaces: 779 <br />Error Codes: <br />Error Code -106 reported for t surface <br />Error Code -108 reported for 514 surfaces <br />Error Code -1000 reported for 264 surfaces <br />Method janbu siMglifred <br />Number of Valid Surfaces: 3995 <br />Number of Invalid Surfaces: 856 <br />Error Codes: <br />Error Code -106 reported for 1 surface <br />Error Code -108 reported for 591 surfaces <br />Error Code -1000 reported for 264 surfaces <br />f=rr Codes <br />The following errors were encountered during the computation: <br />-106 = Average slid width is less than <br />0.0001 " (maximum horizontal extent of soil region). <br />This limitation is imposed to avoid numerical errors <br />which may result from too many slices, or too <br />small a slip region. <br />-108 = Total driving moment <br />or total driving force < 0.1. This is to <br />limit the calculation of extremely high safety