Laserfiche WebLink
0 Water Surface: None <br />Material: Ph V Geomembrane/Soil Liner <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 lb/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 18 degrees <br />Water Surface: None <br />Material: Structural Fill <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 38 degrees <br />Water Surface: None <br />Global Minimums <br />Method: spencer <br />FS: 1.496190 <br />Center: -141.633, 1802.227 <br />Radius: 1728.293 <br />Left Slip Surface Endpoint: 122.285, 94.204 <br />Right Slip Surface Endpoint: 1177.853, 686.005 <br />Resisting Moment=1.18609e+010 lb-ft <br />Driving Moment=7.9274e+009 lb-ft <br />Resisting Horizontal Force=5.91313e+006 lb <br />Driving Horizontal Force=3.95213e+006 lb <br />Valid / Invalid Surfaces <br />Method: spencer <br />Number of Valid Surfaces: 348 <br />Number of Invalid Surfaces: 4503 <br />Error Codes: <br />Error Code -101 reported for 9 surfaces <br />Error Code -103 reported for 21 surfaces <br />Error Code -113 reported for 128 surfaces <br />Error Code -1000 reported for 4345 surfaces <br />Error Codes <br />The following errors were encountered during the computation: <br />-101 = Only one (or zero) <br />surface / slope intersections. <br />-103 = Two surface / slope intersections, <br />but one or more surface / nonslope external polygon <br />intersections lie between them. This usually occurs <br />when the slip surface extends past the bottom of the <br />soil region, but may also occur on a benched <br />slope model with two sets of Slope Limits. <br />-113 = Surface intersects outside slope limits. <br />10