Laserfiche WebLink
Material: Foundation <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 26 degrees <br />Water Surface: None <br />Material: Ph V Geomembrane/Soil Liner <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 18 degrees <br />Water Surface: None <br />Material: Structural Fill <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 38 degrees <br />Water Surface: None <br />Global Minimums <br />Method: spencer <br />FS: 1.222300 <br />Center: 269.931, 728.933 <br />Radius: 587.640 <br />Left Slip Surface Endpoint: 127.061, 158.925 <br />Right Slip Surface Endpoint: 729.031, 362.126 <br />Resisting Moment-- 1.49706e+009 lb-ft <br />Driving Moment=1.22478e+009 lb-ft <br />Resisting Horizontal Force=2.283e+006 lb <br />Driving Horizontal Force= 1.86779e+006 lb <br />Valid / Invalid Surfaces <br />Method: spencer <br />Number of Valid Surfaces: 536 <br />Number of Invalid Surfaces: 4315 <br />Error Codes: <br />Error Code -101 reported for 12 surfaces <br />Error Code -113 reported for 90 surfaces <br />Error Code -1000 reported for 4213 surfaces <br />Error Codes <br />The following errors were encountered during the computation: <br />-101 =Only one (or zero) <br />surface / slope intersections. <br />-113 = Surface intersects outside slope limits. <br />-1000 = No valid slip surfaces are generated <br />at a grid center. Unable to draw a surface. <br />