Laserfiche WebLink
Water Surface: None <br />?. <br />Material: Ph V Geomembrane/Soil Liner <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 18 degrees <br />Water Surface: None <br />Material: Structural Fill <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 38 degrees <br />Water Surface: None. <br />Global Minimums <br />Method: spencer <br />FS: 1.554860 <br />Center: 143.715, 1480.594 <br />Radius: 1358.173 <br />Left Slip Surface Endpoint: 60.047, 125.000 <br />Right Slip Surface Endpoint: 1258.654, 705.000 <br />Resisting Moment=1.15605e+010 lb-ft <br />Driving Moment=7.4351 a+009 lb-ft <br />Resisting Horizontal Force=7.42523e+006 lb <br />Driving Horizontal Force=4.77549e+006 lb <br />Valid / Invalid Surfaces <br />Method: spencer <br />Number of Valid Surfaces: 1100 <br />Number of Invalid Surfaces: 3751 <br />Error Codes: <br />Error Code -101 reported for 27 surfaces <br />Error Code -103 reported for 38 surfaces <br />Error Code -109 reported for 1 surface <br />Error Code -1000 reported for 3685 surfaces <br />Error Codes <br />The following errors were encountered during the computation: <br />-101 =Only one (or zero) <br />surface / slope intersections. <br />-103 = Two surface / slope intersections, <br />but one or more surface / nonslope external polygon <br />intersections lie between them. This usually occurs <br />when the slip surface extends past the bottom of the <br />soil region, but may also occur on a benched <br />slope model with two sets of Slope Limits. <br />-109 = Soiltype for slice base not <br />0 located. This error should occur very rarely,