Laserfiche WebLink
Water Surface: Water Table <br />Custom Hu value: 1 <br />Material: Foundation <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 26 degrees <br />Water Surface: None <br />Material: Ph V Geomembrane/Soil Liner <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 18 degrees <br />Water Surface: None <br />Material: Structural Fill <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 38 degrees <br />Water Surface: None <br />Global Minimums <br />Method: spencer <br />FS: 1.267170 <br />Axis Location: 305.089, 794.189 <br />Left Slip Surface Endpoint: 232.431, 178.129 <br />Right Slip Surface Endpoint: 754.343, 366.427 <br />Resisting Moment-- 1.0804e+009 lb-ft <br />Driving Moment=8.52611e+008 lb-ft <br />Resisting Horizontal Force= 1.47685e+006 lb <br />Driving Horizontal Force=1.16547e+006 lb <br />Valid / Invalid Surfaces <br />Method: spencer <br />Number of Valid Surfaces: 2137 <br />Number of Invalid Surfaces: 2863 <br />Error Codes: <br />Error Code -108 reported for 2459 surfaces <br />Error Code -111 reported for 404 surfaces <br />Error Codes <br />The following errors were encountered during the computation: <br />-108 = Total driving moment <br />or total driving force < 0.1. This is to <br />limit the calculation of extremely high safety <br />factors if the driving force is very small <br />(0.1 is an arbitrary number). <br />-111 = safety factor equation did not converge