Laserfiche WebLink
Water Surface: Water Table <br />Custom Hu value: 1 <br />Material: Foundation <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 26 degrees <br />Water Surface: None <br />Material: Ph IV Geomembrane/Soil Liner <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 18 degrees <br />Water Surface: None <br />Global Minimums <br />Method: spencer <br />FS: 1.179850 <br />Axis Location: 379.154, 1751.287 <br />Left Slip Surface Endpoint: 313.093, 202.131 <br />Right Slip Surface Endpoint: 1578.843, 768.945 <br />Resisting Moment=1.07639e+010 lb-ft <br />Driving Moment=9.1231e+009 lb-ft <br />Resisting Horizontal Force=6.24697e+006 lb <br />Driving Horizontal Force=5.29473e+006 lb <br />Valid / Invalid Surfaces <br />Method: spencer <br />Number of Valid Surfaces: 2755 <br />Number of Invalid Surfaces: 2245 <br />Error Codes: <br />Error Code -108 reported for 1604 surfaces <br />Error Code -111 reported for 641 surfaces <br />Error Codes <br />The following errors were encountered during the computation: <br />-108 = Total driving moment <br />or total driving force < 0.1. This is to <br />limit the calculation of extremely high safety <br />factors if the driving force is very small <br />(0.1 is an arbitrary number). <br />-111 = safety factor equation did not converge <br />List of All Coordinates <br />Material Boundary <br />514.199 246.623 <br />U