Laserfiche WebLink
-110 = The water table or a piezoline <br />does not span the slip region for a given slip <br />surface, when Water Surfaces is specified as <br />the method of pore pressure calculation. If this <br />error occurs, check that the water table or <br />piezoline(s) span the appropriate soil cells. <br />-111 = safety factor equation did not converge <br />-112 = The coefficient M-Alpha = cos(alpha)(1+tan(alpha)tan(phi)/F) <br />< 0.2 for the final iteration of the safety factor calculation. This screens out <br />some slip surfaces which may not be valid in the context of the analysis, in <br />particular, deep seated slip surfaces with many high negative base angle <br />slices in the passive zone. <br />List of All Coordinates <br />Material Boundary <br />160.897 125.000 <br />232.715 125.746 <br />334.279 160.778 <br /> Material Boundary <br /> 308.468 172.179 <br /> 335.725 161.277 <br /> 351.417 155.000 <br /> 366.417 155.000 <br /> 391.417 145.000 <br /> 511.417 175.000 <br /> 530.727 175.000 <br /> 714.131 135.435 <br /> 857.760 125.000 <br /> 886.302 115.936 <br /> 1452.118 113.384 <br />Material Bounda <br />286.224 180.000 <br />334.279 160.778 <br />335.353 160.348 <br />351.224 154.000 <br />366.224 154.000 <br />391.345 143.951 <br />511.540 174.000 <br />530.620 174.000 <br />713.989 134.443 <br />857.570 124.011 <br />886.145 114.937 <br />1452.118 112.384 <br />External Boundary <br />308.468 172.179 <br />288.917 180.000 <br />286.224 180.000 <br />9 248.897 180.000