Laserfiche WebLink
slope model with two sets of Slope Limits. <br />-109 = Soiltype for slice base not <br />located. This error should occur very rarely, <br />if at all. It may occur if a very low number of <br />slices is combined with certain soil geometries, <br />such that the midpoint of a slice base is <br />actually outside the soil region,even though <br />the slip surface is wholly within the soil region. <br />-111 = safety factor equation did not converge <br />-1000 = No valid slip surfaces are generated <br />at a grid center. Unable to draw a surface. <br />List of All Coordinates <br />Search Grid <br />-116.920 650.595 <br />793.593 650.595 <br />793.593 1561.108 <br />-116.920 1561.108 <br />Material Boundary <br />279.750 90.000 <br />324,001 90.000 <br />341.087 85.000 <br />355.696 85.000 <br />412.786 124.420 <br />473.242 122.109 <br />514.071 125.000 <br />583.650 161.376 <br />634.633 164.413 <br />Material Boundary <br />474.468 191.451 <br />506.777 170.776 <br />644.493 165.000 <br />1022.802 315.000 <br />1037.934 315.000 <br />1063.155 325.000 <br />1255.229 330.000 <br />1472.310 408.021 <br />Material Boundary <br />472.613 191.451 <br />506.466 169.788 <br />634.633 164.413 <br />644.663 163.992 <br />1022.993 314.000 <br />1038.125 314.000 <br />1063.358 324.005 <br />1255.416 329.005 <br />1472.310 406.958 <br /><.