Laserfiche WebLink
Material: Foundation <br />Strength Type: Shear Normal function <br />Unit Weight: 120 Ib/ft3 <br />Water Surface: None <br />Material: Ph V Geomembrane/Soil Liner <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 18 degrees <br />Water Surface: None <br />Material: Structural Fill <br />Strength Type: Mohr-Coulomb <br />Unit Weight: 120 Ib/ft3 <br />Cohesion: 1 psf <br />Friction Angle: 38 degrees <br />Water Surface: None <br />Global Minimums <br />Method: soencer <br />FS: 1.493040 <br />Center: 338.337, 1515.582 <br />Radius: 1369.345 <br />Left Slip Surface Endpoint: 368.143, 146.561 <br />Right Slip Surface Endpoint: 1333.531, 575.000 <br />Resisting Moment= 1.03081 a+010 lb-ft <br />Driving Moment=6.90407e+009 lb-ft <br />Resisting Horizontal Force=6.80534e+006 lb <br />Driving Horizontal Force=4.55804e+006 lb <br />Valid / Invalid Surfaces <br />Method: spencer <br />Number of Valid Surfaces: 1382 <br />Number of Invalid Surfaces: 3469 <br />Error Codes: <br />Error Code -101 reported for 78 surfaces <br />Error Code -103 reported for 233 surfaces <br />Error Code -109 reported for 1 surface <br />Error Code -1000 reported for 3157 surfaces <br />Error Codes <br />The following errors were encountered during the computation: <br />-101 = Only one (or zero) <br />surface / slope intersections. <br />-103 = Two surface / slope intersections, <br />but one or more surface / nonslope external polygon <br />intersections lie between them. This usually occurs <br />when the slip surface extends past the bottom of the <br />soil region, but may also occur on a benched <br />slope model with two sets of Slope Limits.