Laserfiche WebLink
GP-DV-Edited.OPT <br />along the ground surface between x = 234.6 ft <br />and x = 235.0 ft <br />Each surface terminates between x = 325.0 ft <br />and x = 335.0 ft <br />Unless further limitations were imposed, the minimum elevation <br />at which a surface extends is y = .0 ft <br />* * * * * DEFAULT SEGMENT LENGTH SELECTED BY XSTABL * * * * * <br />8.0 ft line segments define each trial failure surface. <br />ANGULAR RESTRICTIONS : <br />The first segment of each failure surface will be inclined <br />within the angular range defined by : <br />Lower angular limit -45.0 degrees <br />Upper angular limit -1.0 degrees <br />************************************************************************ <br />-- WARNING -- WARNING -- WARNING -- WARNING -- (# 48) <br />************************************************************************ <br />------------------------------------------------------------ <br />USER SELECTED option to maintain strength greater than zero <br />------------------------------------------------------------ <br />************************************************************* <br />** Factor of safety calculation for surface # 7262 ** <br />** failed to converge within FIFTY iterations ** <br />** ** <br />** The last calculated value of the FOS was 21.0863 ** <br />** This will be ignored for final summary of results ** <br />************************************************************* <br />Circular surface (FOS= 21.0863) is defined by: xcenter = 276.81 <br />ycenter = 290.81 Init. Pt. = 234.92 Seg. Length = 8.00 <br />------------------------------------------------------------------- <br />****************************************** <br />** NOTE: WARNING MESSAGES FOR SUBSEQUENT <br />** THAT DID NOT CONVERGE HAVE BEEN OMITTED <br />** <br />SURFACES ** <br />FOR BREVITY ** <br />** <br />********************************************************* <br />Page 3