Laserfiche WebLink
GP-C2-Edited.OPT <br />A critical failure surface searching method, using a random <br />technique for generating CIRCULAR surfaces has been specified. <br />9000 trial surfaces will be generated and analyzed. <br />30 Surfaces initiate from each of 300 points equally spaced <br />along the ground surface between x = 46.0 ft <br />and x = 181.0 ft <br />Each surface terminates between x = 261.0 ft <br />and x = 271.0 ft <br />Unless further.limitations were imposed, the minimum elevation <br />at which a surface extends is y = .0 ft <br />* * * * * DEFAULT SEGMENT LENGTH SELECTED BY XSTABL * * * * * <br />8.0 ft line segments define each trial failure surface. <br />ANGULAR RESTRICTIONS : <br />The first segment of each failure surface will be inclined <br />within the angular range defined by : <br />Lower angular limit -45.0 degrees <br />Upper angular limit -1.0 degrees <br />************************************************************* <br />** Factor of safety calculation for surface # 8056 ** <br />** failed to converge within FIFTY iterations ** <br />** ** <br />** The last calculated value of the FOS was 20.9842 ** <br />** This will be ignored for final summary of results ** <br />************************************************************* <br />Circular surface (FOS= 20.9842) is defined by: xcenter = 213.85 <br />ycenter = 327.18 Init. Pt. = 167.00 Seg. Length = 8.00 <br />------------------------------------------------------------------- <br />****************************************** <br />** NOTE: WARNING MESSAGES FOR SUBSEQUENT <br />** THAT DID NOT CONVERGE HAVE BEEN OMITTED <br />** <br />k************** <br />SURFACES ** <br />FOR BREVITY ** <br />** <br />Page 3