Laserfiche WebLink
2.05.6 <br />obtained semi-annually during the second and fourth quarters. During <br />August of each year a sample will be obtained and analyzed for the <br />parameters on List 2. <br />Stephens Draw will be monitored quarterly at the designated upstream and <br />downstream monitoring locations shown on Map 9. Field parameters will be <br />measured each quarter. A full suite sample from List 1 will be obtained semi- <br />annuallyduring the second and fourth quarters. <br />Gulches A, B, C, & D will be monitored quarterly at the designated upstream <br />and downstream monitoring locations shown on Map 9 except A-Gulch does <br />not have an upstream monitoring point. Field parameters will be measured <br />each quarter. A full suite sample from List 1 will be obtained semi-annually <br />during the second and fourth quarters. <br />Alluvial wells 1 through 9, 11, 12 and 14 through 17 will be monitored <br />quarterly for field parameters. A full suite sample will be obtained semi- <br />annuallyduring the second and fourth quarters. <br />• Culverts 1 through 4 will be monitored quarterly for field parameters. A full <br />suite sample from List 1 will be obtained semi-annually during the second <br />and fourth quarters. <br />The sediment ponds will be monitored in accordance with discharge permit <br />requirements. During August of each year a sample will be obtained and <br />analyzed for the parameters on List 2 if the sediment ponds discharge. <br />Mine inflows will be measured semi-annuallyforfield parameters. An annual <br />full suite analysis will be obtained for any point source of inflow greater than <br />5 gallons per minute. Results of the mine inflow monitoring including a seep <br />location map and seep rate of flow will be submitted with the annual <br />hydrologic report. <br />Small area exemptions shown on Map 20 will be monitored quarterly. The <br />Applicant will use its best efforts to obtain samples. The samples will be <br />analyzed for pH, conductivity and total settleable solids. Samples will be in <br />compliance if they contain settleable solid levels of 0.5 ml/I or less and the <br />pH is greater than 6.5 and less than 9.0. <br />The following pages list the water monitoring stations. <br />• <br />PR-11 2.05 - 78 11/08 <br />APPRovEo <br />