Laserfiche WebLink
M03106GE <br />is recommended that the geotechnical engineer be provided the <br />opportunity for a general review of the final project design and <br />specifications in order that the earthwork and foundation recommen- <br />dations may be properly interpreted and implemented in the design <br />and specifications. <br />This report does not provide earthwork specifications. We can <br />provide guidelines for your use in preparing project specific <br />earthwork specifications. Please contact us if you need these for <br />your project. <br />This report presents both suggestions and recommendations. The <br />suggestions are presented so that the owner and the owner's <br />representatives may compare the cost to the potential risk or <br />benefit for the suggested procedures. <br />This report contains suggestions and recommendations which are <br />intended to work in concert with recommendations provided by the <br />other design team members to provide somewhat predictable perfor- <br />mance. If any of the recommendations are not included in the <br />design and construction of the project it may result in unpredict- <br />able performance or performance different than anticipated. We <br />recommend that we be requested to provide geotechnical engineering <br />observation and materials testing during the construction phase of <br />• the project as discussed in this report. The purpose for on site <br />observation and testing by us during construction is to help <br />provide continuity of service from the planning of the project <br />through the construction of the project. This service will also <br />allow us to revise our recommendations if conditions occur or are <br />discovered during construction that were not evidenced during the <br />initial study. We suggest that the owner and the contractor make <br />provisions in their construction budget and construction schedule <br />to accommodate unexpected subsurface cohditions. <br />we represent that our services were performed within the limits <br />prescribed by you and with the usual thoroughness and competence of <br />the current accepted practice of the geotechnical engineering pro- <br />fession in the area. No warranty or representation either ex- <br />pressed or implied is included or intended in this report or our <br />contract. We are available to discuss our findings with you. If <br />you have any questions please contact us. The supporting data for <br />this report is included in the accompanying figures and appendices. <br />This report is a product of Lambert and Associates. Excerpts <br />from this report used in other documents may not convey the intent <br />or proper concepts when taken out of context, or they may be <br />misinterpreted or used incorrectly. Reproduction, in part or <br />whole, of this document without prior written consent of Lambert <br />and Associates is prohibited. <br /> <br />11 <br />3itambert anD ~,s~,oociate~ <br />CONSULTwG GEOTECNNICAL ENGINEERS AND <br />MATERIAL TESTING <br />