2008-06-09_PERMIT FILE - C1980007 ‎(5)‎

• Permit No: C1980007
• IBM Index Class Name: Permit File
• Doc Date: 6/9/2008
• Doc Name: Exhibit 79 Deer Creek Shaft and E Seam Methane Drainage Wells Project Final-August 2007
• Section_Exhibit Name: Exhibit 80 Drilling Activities - TR111
• Media Type: D
• Archive: No

Alternatives Considered in Detail
Table 2-1
_:~ Design Criteria
Topic Design Criteria for the Proposed Action
_ 15. Cross slopes will be maintained on access roads to promote removal
of water from the road surface. Surface drainage structures shall be
constructed at appropriate intervals to divert water from roadway
surface..... Relief ditches at regular intervals to direct drainage off
of the road grade and into vegetated areas.
16. Ditches would be allowed to vegetate or include large rocks or
stones to slow the velocity of drainage and allow sediment to settle
out.
17. Where drainage ditches are installed to direct runoff away from the
road, water bars or hay bale dikes would be installed perpendicular
to the flow direction of the ditch to reduce runoff velocity and settle
out sediment on steeper grades.
18. Road construction plans would identify specific locations of
drainage features and BMPs for approval by the FS engineer/permit
administrator prior to construction.
19. Road design packages will be submitted to the FS for approval prior
to any construction activity. Roads open to the public (Levels 3, 4
& 5) will require written approval prior to any construction activity.
20. Project access roads will be gated and closed year-round to the
general public. Persomlel with access will be monitored to insure
such access is not abused; i.e., no access during non-working hours
for purposes unrelated to the project such as hunting or off-roading.
21. All new access roads constructed for the sole use of this project will
be decommissioned by full obliteration when no longer needed for
the project and reclaimed.
22. Road work will be performed only upon authorization of the
District Ranger and comply with the terms of MCC's Road Use
Permit. Roads will be designed and constructed to provide
maximum stability and protect the surface resource. Best
Management Practices will be used in designing the roads and
during construction. All roads will be upgraded or constructed to
USFS specified standards for either temporary or classified roads,
as appropriate and approved by the USFS, with a design speed of
15 miles per hour.
•
Road Use
Permit(FSM
2733.04b and
FSM 7730) ,
WCPH(FSH
2509.25)
WCPH (FSH
2509.25)
Project Plan,
WCPH (FSH
2509.25)
Road Use
Permit (FSM
2733.04b and
FSM 7730) ,
Forest
Service
Roads Policy
Forest Plan
RACR
RACR, 36
CFR 228 E,
Road Use
Permit (FSM
2733.04b and
FSM 7730)
Road Use
Permit (FSM
2733.04b and
FSM 7730),
MCC Project
Plan
Deer Creek Ventilation Shaft and E Seam Methane Drainage Wells FEIS 25