2008-12-15_GENERAL DOCUMENTS - M1977036

• Permit No: M1977036
• IBM Index Class Name: GENERAL DOCUMENTS
• Doc Date: 12/15/2008
• Doc Name: CD Request
• From: Todd Yee
• To: DRMS
• Permit Index Doc Type: Gen. Correspondence
• Media Type: D
• Archive: No

r
?e-
?o
Document Imaging CD/DVD
REQUEST FORM & INSTRUCTIONS
Request for the DMG document images on the following DMG permit file(s):
As we spoke this is a reorder request for these two files because the previous CDs viewers would not locate the repository. Thank You!
1) M-1977-081 2) M-1977-036 3) 4)
The DMG document images can be copied to either a CD or a DVD. Please check one below and return this
form with your payment to DMG. If a CD is requested and the permit is too large for a CD, you will be called.
Please allow up to 5 business days from the receipt of this signed document for your CD or DVD to be available.
X CD @ $5.00 per disk X DVD @ $20.00 per disk
X Please check if you want a copy of the QuickView installation instructions.
Computer requirements to use the DMG document imaging CD (or DVD):
1. A program called QuickView will be copied to the CD and must be installed on your computer in order to use a DMG imaging CD the
first time. Future use of this or other imaging CD's does not require a new installation of the software.
2. The CD or DVD that you purchase must be in the D: drive. A DVD drive will read a CD or DVD.
3. The CD will contain files with the tif extension. There needs to be an image viewing application for tif files on your computer that
will handle single and multi-page documents. On a Windows XP computer, the default viewing programs are called "Windows Picture
and Fax Viewer" or "Paint" and they do not work with QuickView. The Imaging Viewer that comes with pre-Windows XP computers
does work. DMG has determined that a program called "IrfanView", which can be downloaded from IrfanView.com, does work with
QuickView. After downloading "IrfanView", it needs to be configured as your default tif viewer. DMG does not support or endorse this
software and the licensing and registration are the user's responsibility. There are many other programs that work as well, such as
"Imaging Preview" and "Imaging for Windows".
Instructions:
1. Insert the CD into your computer.
2. Allow time for the CD to install.
3. Eject the CD from the computer.
4. Reinsert the CD into the computer.
5. You are ready to view the Permit Files.
NOTE: A program called QuickView Autorun, which runs the QuickView
setup program, has also been copied to this CD. If the Autorun program
does NOT work, you will need to manually install the QuickView program.
Instructions for manually installing QuickView are available upon request
with the CD or can be viewed at www.mininQ.state.co.us.
The Permit File document images can be viewed in the reception area of the DMG office or they can be purchased on a CD or
DVD. The CD/DVD purchase cost covers the time and labor of making the CD. DMG cannot provide computer related support.
Disclaimer:
The Colorado Division of Minerals and Geology (DMG) is not responsible and shall not be liable to the user for damages of any kind
arising out of the use of data or information provided by the DMG, including the installation of the data or information, its use, or the
results obtained from its use. Any data or information provided by the DMG is provided "as is" without warranty of any kind, either
express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Data or
information provided by the DMG shall be used and relied upon only at the user's sole risk, and the user agrees to indemnify and hold
harmless the DMG, its officials, officers and employees from any liability arising out of the use of the data/information provided.
Customer Mailing and Contact Information:
DMG use only
Todd Yee
Print Name:
Company: J&T Consulting, Inc. CD/DVD creat and
t%ted by:
Address: 1400 W 122nd Ave - Suite 120, Westminster, CO 80234
Phone: [phone]
Q
Signature: Date:/ /_1