Laserfiche WebLink
0 <br />DAKOTA POLYPROPYLENE 45 (JPS) <br />Specification Sheet <br />Properties Test Method Typical Value <br />Guage (Nominal) mils (mm) 0.045 (1.14) <br />Plies, reinforcing 1 <br />Thickness, min <br />1) Overall -mil (mm) ASTM D-751 Optical 0.044 (1.12) <br />2) Over Scrim -mil (mm) Method 0.012 (0.30) <br />Breaking Strength-fabric <br />Min. lbf (kN) ASTM D-751 Method A 300 (1.34) <br />Low Temp. Flex. °F (°C) ASTM D-21361/8-in. -65 (-54) <br /> Mandrel, 4 hr. pass <br />Puncture Resistance, min. FTMS lO1C Method 2031 400 (1.78) <br />Lbs (kN) <br />Tear Strength, min. lbf (Kn) ASTM D-5884 100 (0.45) <br />Dim. Stability (% chg, max.) ASTM D-1204180°F/82°C -0.5 (-0.5) <br /> 1 hour <br />Hydrostatic resist. Min psi ASTM D-751 Method A 400 (2.75) <br />(MPa) Procedure 1 <br />Ply Adhesion, min. lbs/in ASTM D-413 Machine 30 (5.25) <br />(kN/m) method modified <br />Water Absorption max, % ASTM D-47130 days <1% <br />Wt. chg. @70°F (21°C) <br />ESCR (Env. Stress Crack ASTM D-1693 3000 Hours Not affected. by ESC <br />Resist) min. hrs w/o failure <br />UV Resistance ASTM G26 Xenon Arc Pass <br />80° C/4000 hrs <br />The values listed are typical properties and are intended to be used as guidelines only, not as <br />specification limits. No guarantee or warranty is made by Integra Plastics, Inc. as the manner of use, <br />handling and site conditions are beyond our control. Install in accordance with accepted industry <br />standards. • <br />C'uru~m S'ynthzlic C.'overs and Liners <br />500 12`x' Street S.E. • Madis~m, SD 57042 • TOLL, FREE 800-578.5257 • PL[ONE 605-256-2666 • FAX 605-256-2629 <br />,' <br /> <br />